The Gibertini 65 cm offset satellite dish is a compact, stable and easy-to-install antenna designed for homes, holiday properties, motorhomes and other installations where mounting space is limited. Its aluminium reflector combines low weight with good corrosion resistance and provides a gain of 36 dB at 10.95 GHz.
The antenna features a wind-stable construction with a galvanised steel mounting assembly and an aluminium feed arm. Its light-grey finish provides a discreet appearance when installed on a wall, mast or close to a roof.
Elevation can be adjusted from 0 to 80 degrees, while the mast clamp accepts poles measuring 30–90 mm in diameter. The supplied feed holder is designed for LNBs with a standard 40 mm neck diameter.
With its compact dimensions, the Gibertini 65 cm is an excellent choice for receiving stronger satellite positions where a larger dish is unnecessary or installation space is restricted.
✅ Product Benefits
- Compact 65 cm offset satellite dish
- Aluminium reflector
- Gain of 36 dB at 10.95 GHz
- Stable and corrosion-resistant construction
- Galvanised steel mounting assembly
- Aluminium feed arm
- Standard 40 mm LNB holder
- Elevation adjustment from 0 to 80 degrees
- Mast clamp for poles measuring 30–90 mm
- Wind load of 42 kg at 120 km/h
- Operating temperature from −30 to +70°C
- Discreet light-grey finish
- Suitable for installations with limited space
- Ideal for homes, holiday properties, motorhomes and campsites
🎯 Ideal For
- Satellite television in homes and holiday properties
- Motorhomes and caravans
- Permanent campsite installations
- Balcony and wall installation where permitted
- Locations with limited installation space
- Receiving stronger satellite positions
- Single, Twin and Quad LNBs
- Individual and smaller satellite systems
- Permanent mast or wall installations
🔧 Installation
Install the satellite dish on a stable antenna mast or wall bracket that is properly rated for the antenna’s size and wind load. The mast clamp accepts poles measuring 30–90 mm in diameter.
Install a compatible LNB with a 40 mm neck diameter in the feed holder. Connect a suitable 75-ohm coaxial cable between the LNB and the satellite receiver or television with an integrated satellite tuner.
Adjust the azimuth and elevation until the best possible signal strength and signal quality are achieved. A suitable satellite signal meter is recommended for accurate alignment.
Confirm that the mast, wall bracket and all fixings are stable and suitable for outdoor installation.
⚙️ Technical Specifications
Product type: Offset dish for satellite reception
Manufacturer: Gibertini
Nominal size: 65 cm
Colour: Light grey
Overall dimensions: Approximately 67 × 71.5 cm
Gain: 36 dB at 10.95 GHz
Elevation range: 0–80°
Compatible mast diameter: 30–90 mm
Feed holder: 40 mm
Wind load at 120 km/h: 42 kg
Operating temperature: −30 to +70°C
Reflector material: Aluminium
Feed arm material: Aluminium
Mounting material: Galvanised steel
Feed holder material: Hard plastic
Product number: 10071-009
EAN: Not specified
📦 Package Contents
- 1 × Light-grey Gibertini 65 cm aluminium reflector
- 1 × Aluminium feed arm
- 1 × Feed holder for a 40 mm LNB
- 1 × Mast and rear mounting assembly
- Assembly hardware for the antenna
Please note: LNB, antenna mast, wall bracket, coaxial cable, connectors, satellite receiver and other installation materials are not included.
🔧 Compatible Accessories
- Universal LNB with a 40 mm neck diameter
- Single, Twin or Quad LNB
- Antenna mast
- Suitably rated wall bracket
- Balcony mounting bracket
- UV-resistant 75-ohm coaxial cable
- F-connectors or compression connectors
- Satellite receiver
- Television with an integrated DVB-S2 tuner
- DiSEqC switch
- Earthing and equipotential bonding components
- Satellite signal meter
⚠️ Important Information
- The LNB is not included.
- This product is supplied as a bulky freight item.
- The stated 65 cm measurement is the product’s nominal size.
- The antenna’s specified overall dimensions are approximately 67 × 71.5 cm.
- Check the available installation space before ordering.
- The mast or wall bracket must be rated for the antenna’s size and wind load.
- The specified wind load is 42 kg at a wind speed of 120 km/h.
- The wind-load figure must not be interpreted as a guaranteed maximum wind-speed rating.
- Reception performance depends on satellite signal strength, installation location and accurate alignment.
- Check the load-bearing capacity of the building structure before installation.
- Use suitable corrosion-resistant fixings.
- Follow local requirements for earthing, equipotential bonding and lightning protection.
- Inspect the mast clamp, screws and other mounting components regularly.
- Professional installation is recommended when uncertain.
