This 4-way DiSEqC switch connects up to four LNBs or satellite positions to one satellite receiver or television with an integrated satellite tuner.
The switch provides four LNB inputs and one receiver output. All satellite signals share one coaxial downlead, while the required satellite position is selected automatically through the receiver’s DiSEqC settings.
The unit supports DiSEqC 1.0 with port selections A, B, C and D. It can be used with standard Universal LNBs and is suitable for smaller multisatellite systems where one receiver needs access to several satellites.
Its durable sealed enclosure makes the switch suitable for protected installation close to the satellite dish. The F connections should always be protected against moisture when installed outdoors.
✅ Product Benefits
Connects up to four LNBs to one receiver
Supports up to four satellite positions
Four LNB inputs and one receiver output
Supports DiSEqC 1.0
Port selection A, B, C and D
DC pass to the selected LNB
Compatible with standard Universal LNBs
Sealed enclosure for protected outdoor installation
Compact and lightweight construction
Straightforward installation using F connectors
Only one coaxial downlead is required
Cost-effective multisatellite solution
🎯 Ideal For
Satellite systems with two to four LNBs
Reception from several satellite positions
One satellite receiver or tuner
Homes, apartments and holiday properties
Universal LNBs with separate outputs
Linux and Enigma2 receivers supporting DiSEqC 1.0
Installations where several LNBs share one coaxial downlead
Protected installation close to the satellite dish
🔧 Connection and Operation
Connect the LNB cables to the four inputs on the switch. Connect the output to the satellite receiver or television.
Assign each satellite to the correct DiSEqC port – A, B, C or D – in the receiver’s antenna menu. The receiver will then send the appropriate control command when a channel or satellite is selected.
Disconnect receiver power before installation. For outdoor mounting, position the F connectors facing down and protect all connections against moisture.
🔌 Connections
| Connection | Function |
|---|
| LNB A | Input for LNB or satellite position 1 |
| LNB B | Input for LNB or satellite position 2 |
| LNB C | Input for LNB or satellite position 3 |
| LNB D | Input for LNB or satellite position 4 |
| Receiver/Out | Output to one receiver or tuner |
⚙️ Technical Specifications
Product type: 4-way DiSEqC switch
Configuration: 4 inputs and 1 output
LNB inputs: 4
Receiver outputs: 1
Satellite positions: Up to 4
Frequency range: 950–2150 MHz
DiSEqC protocol: DiSEqC 1.0
Control signal: DiSEqC A, B, C and D
Insertion loss: 3.5 dB maximum
Isolation: 20 dB minimum
Input return loss: 8 dB minimum
Output return loss: 8 dB minimum
Operating voltage: 10–21 V DC
Maximum current to LNB port: 300 mA
DC pass: Yes
DC switching: Yes
Input and output impedance: 75 Ω
Connections: F-type
Sealed enclosure: Yes
Operating temperature: −34 to +60 °C
Weight: Approximately 50 g
Price: SEK 95
Availability: In stock for immediate delivery
📦 Package Contents
