The Selfsat H50M Single is a discreet, space-saving flat antenna designed to receive signals from two satellite positions separated by approximately 6°. It is particularly suitable for receiving Astra 19.2° East and Hot Bird 13° East with one connected satellite receiver or tuner.
Integrated DiSEqC switching automatically changes between the satellites when you select a channel. The antenna may also be used with other suitable satellite combinations, such as Astra 19.2° East and Astra 23.5° East, provided that the orbital spacing, coverage and signal strength are suitable at the installation location.
Its modern rectangular housing provides a considerably more discreet appearance than a conventional satellite dish. This makes the H50M ideal for house façades, balconies and other locations where a traditional dish may be visually intrusive.
The antenna provides gain of up to 33.7 dBi at 12.7 GHz, with stated reception performance comparable to a high-quality dish measuring approximately 80 cm. The supplied mounting bracket allows installation on a wall, mast or suitable balcony railing.
✅ Product Benefits
- Receives two satellite positions separated by approximately 6°
- Designed for Astra 19.2° East and Hot Bird 13° East
- Single output for one satellite receiver or tuner
- Automatic satellite switching via DiSEqC
- Flat and discreet alternative to a conventional dish
- Antenna gain of up to 33.7 dBi
- Stated performance comparable to a high-quality 80 cm dish
- Supports vertical and horizontal polarisation
- Designed for the Ku band
- Suitable for wall, mast or balcony installation
- Ideal for houses, apartments and holiday homes
- Modern white finish
🛰️ Satellite Compatibility
The antenna is designed to receive two satellite positions with suitable orbital spacing.
Examples of possible combinations include:
- Astra 19.2° East and Hot Bird 13° East
- Astra 19.2° East and Astra 23.5° East
- Astra 4A and Thor
Reception depends on the geographical location, satellite footprint, local signal strength and an unobstructed view towards the satellites.
👤 Single Version
This is the Single version, featuring one output for connection to one satellite receiver or tuner.
A Twin, Quad or another suitable version is required when two or more receivers or tuners need to operate independently at the same time.
🎯 Ideal For
- Receiving Astra and Hot Bird
- One satellite receiver or tuner
- Houses and townhouses
- Apartments with balconies
- Holiday homes and cabins
- Discreet façade installations
- Mast or balcony mounting
- Locations where a conventional dish is unsuitable
🔧 Installation
Install the antenna on a stable wall, mast or suitable balcony railing using the supplied mounting bracket. The installation position must provide an unobstructed view towards the satellites being received.
Adjust the antenna to the correct azimuth, elevation and skew. Because it receives two orbital positions, alignment must be optimised to provide sufficient signal strength and quality from both satellites.
Connect the antenna’s Single output to the satellite receiver using suitable 75-ohm coaxial cable, then configure the receiver’s DiSEqC settings for the selected satellites.
⚙️ Technical Specifications
Product type: Flat multi-satellite antenna
Model: Selfsat H50M
Version: Single
Number of satellite positions: 2
Recommended orbital separation: Approximately 6°
Example satellites: Astra 19.2° East and Hot Bird 13° East
Satellite switching: Automatic via DiSEqC
Number of outputs: 1
Connection: One satellite receiver or tuner
Frequency range: 10.70–12.75 GHz
Frequency band: Ku band
Polarisation: Vertical and horizontal
Antenna gain: Up to 33.7 dBi at 12.7 GHz
Stated reception performance: Comparable to a high-quality dish measuring approximately 80 cm
Width: Approximately 527 mm
Height: Approximately 520 mm
Depth: Approximately 112 mm
Installation: Wall, mast or suitable balcony railing
Operating environment: Outdoor use
Colour: White
Product number: 12636
EAN: 3700433807005
📦 Package Contents
- 1 × Selfsat H50M flat multi-satellite antenna
- 1 × Mounting bracket
- Installation hardware according to the product’s supplied configuration
Please note: Satellite receiver, coaxial cable, connectors and other installation materials are included only when explicitly stated in the retailer’s package contents.
🔧 Compatible Accessories
- Satellite receiver with DiSEqC support
- 75-ohm satellite coaxial cable
- F-connectors
- Weather-resistant connector protection
- Earthing block and equipotential bonding equipment
- Satellite finder or professional alignment meter
- Wall or mast mounting hardware suitable for the installation location
⚠️ Important Information
- This is the Single version with one output.
- It is intended for one satellite receiver or tuner.
- Confirm that the receiver supports DiSEqC before installation.
- Available satellites and channels depend on geographical location and subscription.
- An unobstructed view towards the selected satellites is required.
- Trees, buildings and other obstacles may weaken or block reception.
- The antenna must be aligned accurately for both orbital positions.
- Installation and cabling must comply with applicable earthing and equipotential bonding requirements.
- Protect outdoor connections against moisture.
- Inspect the installation regularly.
- Professional installation is recommended when uncertain.
