The Gibertini L Series 100 cm is a stable, high-performance offset satellite dish designed for reliable satellite reception in homes, holiday properties, apartment buildings and smaller distribution systems. Its durable aluminium reflector, 70% efficiency and high gain provide a strong reception margin under demanding conditions.
The reflector is manufactured from 1.3 mm aluminium and finished with a durable light-grey polyester coating. The mounting components are made from Sendzimir-galvanised steel, while the feed arm is manufactured from brushed aluminium and features integrated cable routing. This construction provides a clean installation and effective protection against weather and corrosion.
The dish operates across the 10.00–13.00 GHz frequency range and provides a gain of more than 40.50 dB at 12.75 GHz. Elevation can be adjusted from 0 to 80 degrees, and the mast clamp is suitable for poles measuring 30–90 mm in diameter.
Its high level of pre-assembly and clip-in feed arm simplify installation. The feed holder accepts 40 or 23 mm components, providing flexibility when selecting a compatible LNB or feed.
✅ Product Benefits
- High-performance 100 cm offset satellite dish
- Durable 1.3 mm aluminium reflector
- High gain for stable satellite reception
- 70% efficiency
- Durable light-grey polyester coating
- Sendzimir-galvanised mounting components
- Brushed aluminium feed arm
- Integrated cable routing through the feed arm
- Feed holder for 40 and 23 mm components
- Elevation adjustment from 0 to 80 degrees
- Mast clamp for poles measuring 30–90 mm
- High level of pre-assembly
- Practical clip-in feed arm
- Wide operating temperature range from −30 to +70°C
- Stable and long-lasting construction
🎯 Ideal For
- Satellite television in homes and holiday properties
- Installations requiring a strong reception margin
- Receiving weaker satellite signals
- Apartment buildings and smaller communal systems
- Single, Twin, Quad and Quattro LNBs
- Multiswitch installations
- Permanent mast or wall installations
- Locations where a smaller dish cannot provide sufficient signal
- Professional and domestic satellite systems
🔧 Installation
Install the satellite dish on a stable antenna mast or a wall bracket that is correctly rated for the antenna’s size and wind load. The mast clamp accepts poles measuring 30–90 mm in diameter.
Clip the feed arm into position and install a compatible LNB or feed with a 40 or 23 mm mounting diameter in the feed holder. The coaxial cable can be routed through the feed arm’s integrated cable management for a cleaner and better-protected installation.
Adjust the azimuth and elevation until the best possible signal strength and signal quality are achieved. A suitable satellite signal meter is recommended for accurate alignment.
Because of the antenna’s size and wind load, the mast, wall bracket, fixings and supporting building structure must be properly rated for the installation.
Professional installation is recommended when uncertain.
⚙️ Technical Specifications
Product type: Offset dish for satellite reception
Manufacturer: Gibertini
Series: L Series
Nominal size: 100 cm
Colour: Light grey
Frequency range: 10.00–13.00 GHz
Reflector dimensions: 97 × 104 cm
Effective reflector area: 94 × 101 cm
Efficiency: 70%
Gain at 10.70 GHz: More than 39.00 dB
Gain at 11.70 GHz: More than 39.70 dB
Gain at 12.75 GHz: More than 40.50 dB
On-axis cross-polarisation value: −28 dB
Side-lobe suppression: −24 dB
Noise temperature at 30° elevation: 38 K
F/D ratio: 0.67
Beamwidth at −3 dB: 1.76°
Offset angle: 21°
Required feed illumination angle: 70°
Mechanical feed holder: 40/23 mm
Elevation range: 0–80°
Compatible mast diameter: 30–90 mm
Reflector thickness: 1.3 mm
Wind load at 120 km/h: 91 kg
Operating temperature: −30 to +70°C
Weight: Approximately 7 kg
Reflector material: Aluminium
Reflector finish: Polyester coating
Feed arm material: Brushed aluminium
Mounting material: Sendzimir-galvanised steel
Cable routing: Integrated into the feed arm
Assembly: Highly pre-assembled with clip-in feed arm
Packaging: Individually packed
Product number: 10074-009
EAN: 4043745201123
Note: The supplier’s marked performance values apply at a reference frequency of 10.95 GHz using a matched feed.
📦 Package Contents
- 1 × Light-grey Gibertini L Series 100 cm aluminium reflector
- 1 × Brushed aluminium feed arm
- 1 × Feed holder for 40/23 mm components
- 1 × Mast mounting assembly
- Assembly hardware for the antenna
Please note: LNB, antenna mast, wall bracket, coaxial cable, connectors, satellite receiver and other installation materials are not included.
🔧 Compatible Accessories
- Universal LNB with a 40 mm neck diameter
- LNB or feed with a 23 mm mounting diameter
- Single, Twin, Quad or Quattro LNB
- Heavy-duty antenna mast
- Suitably rated wall bracket
- UV-resistant 75-ohm coaxial cable
- F-connectors or compression connectors
- Satellite receiver
- DiSEqC switch
- Multiswitch for multiple receivers
- Earthing and equipotential bonding components
- Satellite signal meter
⚠️ Important Information
- The LNB is not included.
- This product is supplied as a bulky freight item.
- The stated 100 cm measurement is the product’s nominal size.
- The reflector’s actual overall dimensions are approximately 97 × 104 cm.
- Check the available installation space before ordering.
- The mast or wall bracket must be rated for the antenna’s size and wind load.
- The specified wind load is 91 kg at a wind speed of 120 km/h.
- The wind-load figure must not be interpreted as a guaranteed maximum wind-speed rating.
- Check the load-bearing capacity of the building structure before installation.
- Use suitable corrosion-resistant fixings.
- Follow local requirements for earthing, equipotential bonding and lightning protection.
- Inspect the mast clamp, screws and other mounting components regularly.
- Professional installation is recommended when uncertain.
