The Megasat Diavolo Single Monoblock LNB is a convenient all-in-one solution for simultaneous reception from Astra 19.2°E and Hotbird 13°E using one satellite dish. The two orbital positions are approximately 6° apart and are selected automatically by the LNB’s integrated DiSEqC switch.
The product combines two Universal LNB sections and a DiSEqC switch in one unit. This simplifies installation because two separate LNBs, a multifeed holder and an external DiSEqC switch are not required.
The LNB has one output and is intended for one satellite receiver or independent tuner. Its specified 0.1 dB noise figure, good cross-polarisation isolation and stable frequency response make it suitable for digital satellite television and HDTV.
The standard 40 mm mounting section fits many conventional offset satellite dishes. Integrated weather protection covers the connection and contributes to a durable outdoor installation.
✅ Product Benefits
Receives Astra 19.2°E and Hotbird 13°E simultaneously
Two satellite positions using one dish
Designed for approximately 6° orbital spacing
One output for one receiver or tuner
Integrated DiSEqC switch
No separate external DiSEqC switch required
Very low specified noise figure of 0.1 dB
Good noise suppression
High cross-polarisation isolation
Stable frequency response
Universal low- and high-band operation
Controlled using 13/18V and 0/22 kHz
Suitable for digital and analogue satellite reception
HDTV-compatible
Standard 40 mm mounting section
Integrated weather protection
Low power consumption
Designed to withstand high and low outdoor temperatures
🎯 Ideal For
Astra 19.2°E and Hotbird 13°E
Installations with one satellite receiver
Televisions with integrated satellite tuners
Digital satellite television and HDTV
European satellite channels
Multilingual households
Receiving two satellites with one dish
Installations where a separate DiSEqC switch should be avoided
Conventional offset dishes with a 40 mm LNB holder
🛰️ Satellite Reception
| Feature | Specification |
|---|
| Satellite position 1 | Astra 19.2°E |
| Satellite position 2 | Hotbird 13°E |
| Orbital spacing | Approximately 6° |
| Satellite switching | Integrated DiSEqC |
| Independent tuners | 1 |
The DiSEqC port order may vary between product versions. Follow the markings on the supplied product and verify reception through the receiver’s antenna settings.
🔧 Connection and Operation
Install the Monoblock in the dish’s 40 mm LNB holder. Connect one coaxial cable between the LNB output and the satellite receiver or television with an integrated satellite tuner.
The receiver is normally configured as follows:
LNB type: Universal
Low-band LO: 9750 MHz
High-band LO: 10600 MHz
Satellite switching: DiSEqC 1.0
Low band: 0 kHz
High band: 22 kHz
Vertical polarisation: 13V
Horizontal polarisation: 18V
Assign the correct DiSEqC port to Astra and Hotbird according to the markings on the supplied product.
As the LNB has one output, it supports one independent tuner. A Twin Tuner receiver normally requires an LNB with at least two outputs for fully independent viewing and recording.
⚙️ Technical Specifications
Product type: Universal Single Monoblock LNB
Manufacturer: Megasat
Model: Diavolo Monoblock Single
Number of satellite positions: 2
Orbital spacing: Approximately 6°
Intended satellites: Astra 19.2°E and Hotbird 13°E
Number of outputs: 1
Independent receivers/tuners: 1
Satellite switching: Integrated DiSEqC switch
Input frequency: 10.7–12.75 GHz
Low-band LO frequency: 9.75 GHz
High-band LO frequency: 10.6 GHz
Noise figure: 0.1 dB, specified value
Polarisation switching: 13/18V
Band switching: 0/22 kHz
LNB type: Universal
Mounting diameter: 40 mm
Weather protection: Integrated
Power consumption: Low
Digital satellite reception: Yes
Analogue satellite reception: Yes
HDTV-compatible: Yes
Output: 1 × female F-connector
Output impedance: 75 Ω
Product number: 10756
EAN: 4046173100105
📦 Package Contents
