The Inverto Dielectric Multifeed Kit is a complete mounting and connection solution for installing up to four slim Dielectric Single or Twin LNBs on one satellite dish.
The system is designed for receiving satellite positions located very close to each other. With compatible slim 23 mm LNBs and suitable installation conditions, reception of satellites spaced approximately 2° apart may be possible.
The package includes a multifeed holder, two 4/1 DiSEqC switches, connection cables, spacing blocks, extensions and the required mounting components. It is suitable for many satellite dishes measuring approximately 60–120 cm.
✅ Product Benefits
Holds up to four LNBs
Designed for Inverto Dielectric Single and Twin LNBs
Allows LNBs to be positioned close together
Suitable for satellite positions from approximately 2° apart
Two 4/1 DiSEqC switches included
Cables between the LNBs and switches included
Adjustable spacing blocks and extensions
23-to-40 mm adapter included
Suitable for many 60–120 cm satellite dishes
Installation guide and mounting tool included
🔧 Short Installation Guide
Attach the multifeed holder to the satellite dish’s LNB arm using the included adapter, then position the LNB units on the holder. Use the spacing blocks and extensions to set the correct position for each satellite.
Connect the LNB outputs to the DiSEqC switches using the supplied cables. Align the dish first, then fine-tune each LNB individually for the strongest signal and best signal quality.
⚙️ Technical Specifications
Product type: Complete multifeed and DiSEqC kit
Manufacturer: Inverto
LNB capacity: Up to 4 LNBs
Compatible LNBs: Inverto Dielectric Single and Twin
LNB neck diameter: 23 mm
Included adapter: 23 to 40 mm
Minimum possible satellite spacing: Approximately 2° under suitable conditions
DiSEqC switches: 2 × 4 inputs to 1 output
Recommended dish size: Approximately 60–120 cm
Installation: Multifeed installation on one satellite dish
Availability: In stock for immediate delivery
📦 Package Contents
1 × multifeed LNB holder
1 × L-shaped bracket for switch installation
2 × 4/1 DiSEqC switches
4 × cable sets between LNBs and switches
4 × spacing blocks with extensions
5 × mounting screws
1 × Allen key
1 × 23-to-40 mm adapter
1 × installation manual
