GT-SAT GT-S1dCSS24 Unicable II LNB – 24 User Bands and 1 Legacy Output | 4K/UHD

The GT-SAT GT-S1dCSS24 is a professional, programmable Unicable II/dCSS LNB with one powerful SCR output and one separate Legacy output.

The SCR/dCSS output can supply up to 24 compatible tuners through a single coaxial cable. The signal can be distributed to several receivers or rooms using Unicable-compatible splitters, making it an efficient solution where many tuners must be connected but only one coaxial cable is available.

The separate Legacy output can simultaneously supply one conventional satellite receiver or television without Unicable support. The LNB can therefore serve up to 24 Unicable tuners and one traditional receiver, providing a total capacity of up to 25 tuners or receivers.

The GT-S1dCSS24 supports EN50494, EN50494+, EN50607 and dHello. The first eight user bands work with standard EN50494 receivers. Equipment specifically supporting EN50494+ can use up to 16 user bands. Full access to all 24 user bands normally requires EN50607 or dHello support.

The LNB supports HDTV, DVB-S2 and 4K/UHD and can be programmed using the separately available GT-SAT GT-DC2 dController.

✅ Product Benefits

• One SCR/dCSS output with 24 user bands

• One separate Legacy output

• Up to 24 Unicable tuners through one coaxial cable

• One conventional satellite receiver through the Legacy output

• Total capacity of up to 25 tuners or receivers

• Supports EN50494

• Supports EN50494+

• Supports EN50607 and dHello

• Programmable using the GT-SAT GT-DC2 dController

• Very low typical noise figure of 0.1 dB

• Stable gain through the SCR output

• Good cross-polarisation isolation

• DiSEqC 2.0 communication through the SCR output

• Standard 40 mm mounting neck

• Extendable weather cover

• HDTV-, DVB-S2- and 4K/UHD-compatible

• Operating temperature from −30 to +65°C

🎯 Ideal For

• Homes with multiple satellite tuners

• Apartment and multi-dwelling installations

• Multi-tuner satellite receivers

• Enigma2 receivers with FBC tuners

• PVR and recording receivers

• Televisions with Unicable-compatible satellite tuners

• Installations using an existing coaxial cable

• Combining a Unicable system with one older satellite receiver

• HDTV, DVB-S2 and 4K/UHD reception

• Professional and programmable satellite systems

🔧 Connection and Operation

The output marked SCR is used for the Unicable/dCSS system. It can be connected directly to a compatible receiver or divided using Unicable-compatible splitters.

Every tuner connected to the SCR output must be assigned its own user band and corresponding frequency. Two tuners on the same cable system must not use the same user band simultaneously.

The output marked Legacy operates as a conventional Universal LNB output. It can supply one traditional satellite receiver or tuner using standard 13/18V and 0/22 kHz control.

A multi-tuner receiver may require several user bands. Capacity should therefore be calculated by the number of tuners, not only the number of physical receiver boxes.

📡 Capacity and Protocols

Please note: The LNB has two physical F-outputs: one SCR/dCSS output and one Legacy output.

⚙️ Technical Specifications

Product type: Programmable Unicable II/dCSS LNB

Model: GT-S1dCSS24

Satellite positions: 1

SCR/dCSS outputs: 1

User bands: 24

Legacy outputs: 1

Total capacity: Up to 24 Unicable tuners and 1 Legacy receiver

Protocols: EN50494, EN50494+, EN50607 and dHello

SCR output communication: DiSEqC 2.0

Legacy control: DiSEqC 1.0

Programmable: Yes, using the GT-DC2 dController

Typical noise figure: 0.1 dB

Legacy output gain: 57–61 dB

SCR output gain: 42–62 dB

SCR gain flatness: ±0.2 dB over 26 MHz and temperature

Legacy gain flatness: ±0.5 dB over 26 MHz and temperature

SCR gain variation: 1 dB over temperature

Legacy gain variation: 4 dB over temperature

Cross-polarisation isolation: More than 25 dB over temperature

Image rejection: More than 40 dB over temperature

Supply voltage: 10–20V

Legacy output power consumption: 90 mA

SCR output power consumption: 300 mA

Mounting diameter: 40 mm

Feed-neck length: 42 mm

Operating temperature: −30 to +65°C

Weather protection: Extendable connector cover

HDTV-compatible: Yes

DVB-S2-compatible: Yes

4K/UHD-compatible: Yes

Outputs: 2 × F-connectors

Product number: 13519

EAN: 5453001615561

📻 SCR Frequencies

• CH01: 975 MHz

• CH02: 1025 MHz

• CH03: 1075 MHz

• CH04: 1125 MHz

• CH05: 1175 MHz

• CH06: 1225 MHz

• CH07: 1275 MHz

• CH08: 1325 MHz

• CH09: 1375 MHz

• CH10: 1425 MHz

• CH11: 1475 MHz

• CH12: 1525 MHz

• CH13: 1575 MHz

• CH14: 1625 MHz

• CH15: 1675 MHz

• CH16: 1725 MHz

• CH17: 1775 MHz

• CH18: 1825 MHz

• CH19: 1875 MHz

• CH20: 1925 MHz

• CH21: 1975 MHz

• CH22: 2025 MHz

• CH23: 2075 MHz

• CH24: 2125 MHz

CH01–CH08: Standard EN50494 and EN50607/dHello

CH09–CH16: EN50494+ with compatible equipment and EN50607/dHello

CH17–CH24: EN50607/dHello

📦 Package Contents

• 1 × GT-SAT GT-S1dCSS24 Unicable II/dCSS LNB