Connect up to four LNBs to one satellite receiver with this 4-way DiSEqC switch. The switch routes the selected LNB signal through a single coaxial cable to the receiver, with selection controlled through the receiver’s DiSEqC settings.
It is a practical solution for satellite installations using multiple LNBs to receive different satellite positions. The switch provides four LNB inputs and one output for a satellite receiver or a TV with a satellite tuner and DiSEqC support.
The included weather cover protects the switch when installed outdoors. Suitable for wall or mast mounting, it connects using coaxial cables with F connectors. The switch supports DiSEqC 2.0 and operates within a frequency range of 900–2400 MHz.
✅ Product Benefits
- Connect up to four LNBs to one receiver.
- Use one shared coaxial cable from the switch to the receiver.
- Select the LNB through the receiver’s DiSEqC settings.
- Four clearly labelled LNB inputs and one receiver output.
- Protective weather cover included.
- Suitable for wall or mast mounting.
- F connections for satellite coaxial cables.
🎯 Ideal For
- Satellite installations with up to four LNBs.
- Multifeed systems receiving several satellite positions.
- Satellite receivers with DiSEqC control.
- TVs with a satellite tuner and DiSEqC support.
- Installations connecting multiple LNBs to one shared cable run.
🔧 Connection and Operation
Connect the cables from the LNBs to inputs LNB 1–4. Connect the Receiver output to the satellite receiver or the TV’s satellite input.
Assign the corresponding DiSEqC port to each satellite position in the receiver’s installation menu. The receiver then controls which LNB input the switch selects.
Mount the switch on a wall or mast using the included protective cover. Cable connections must also be protected against moisture when installed outdoors.
📡 Capacity and Connections
| Feature | Specification |
|---|
| LNB inputs | 4 |
| Receiver outputs | 1 |
| Connected LNBs | Up to 4 |
| Receivers | 1 |
| Connector type | Female F |
| Control | DiSEqC 2.0 |
📺 Signal and Satellite Selection
The switch selects the signal from one of its four LNB inputs and passes it to the receiver. Selection is controlled by DiSEqC commands from the receiver.
The frequency range is 900–2400 MHz, with an insertion loss of 3 dB. This product is intended for satellite signals and does not distribute them to multiple independent receivers.
⚙️ Technical Specifications
Product type: 4-way DiSEqC switch
Brand: Goobay
Manufacturer’s article number: 67007
DiSEqC standard: 2.0
Number of inputs: 4
Number of outputs: 1
Frequency range: 900–2400 MHz
Insertion loss: 3 dB
Connections: Female F
Mounting: Wall or mast
Weather protection: Protective cover included
📦 Package Contents
- 1 × 4-way DiSEqC switch.
- 1 × protective weather cover.
