The Televes 543603 EasyF is a compact 3-way antenna splitter that distributes one incoming signal to three outputs. Its 5–2400 MHz frequency range supports terrestrial TV, cable TV and satellite signal distribution in antenna installations and SMATV systems.
The splitter provides different attenuation levels across its outputs. Output W3 has lower signal loss than W1 and W2, allowing the distribution to be adapted to different cable runs. It can, for example, serve a longer cable run where more signal needs to be retained.
The EasyF connection system allows coaxial cables to connect directly without separate F connectors. Class A shielding, DC pass, wall mounting tabs and an earthing screw make it a practical choice for a compact and tidy installation.
✅ Benefits
- Three outputs for distributing one shared antenna signal.
- 5–2400 MHz for TV, cable TV and satellite.
- Lower attenuation on W3 for adapting to different cable runs.
- EasyF connections without separate F connectors.
- Compact design for smaller junction boxes.
- Class A shielding for effective screening.
- DC pass from output to input.
- Wall mounting tabs and earthing screw for convenient installation.
🎯 Ideal for
- Distributing terrestrial DVB-T/T2 signals to multiple antenna outlets.
- Cable TV signal distribution.
- Distributing satellite signals within a suitable SAT installation.
- SMATV systems and shared antenna installations.
- Installations with different cable lengths, where one output requires lower attenuation.
- Installation in small connection spaces.
🔧 Connection and use
Connect the incoming coaxial cable to the input, then connect the cables serving antenna outlets or other installation components to the three outputs. Cables connect directly through the EasyF terminals.
Select each output according to cable losses and the required signal level. W3 has lower attenuation and can serve the cable run that needs more signal.
The splitter provides DC pass from output to input. Follow the connection markings and the power requirements of connected equipment.
Unused outputs must be terminated with suitable 75 Ω termination resistors. Outdoor installations require a suitable protective enclosure.
📡 Capacity and connections
| Feature | Specification |
|---|
| Inputs | 1 |
| Outputs | 3 |
| Total signal connections | 4 |
| Connection type | EasyF, direct coaxial cable connection |
| Signal types | Terrestrial TV, cable TV and SAT |
| Impedance | 75 Ω |
| Distribution | Different attenuation levels across outputs |
| Output with lowest attenuation | W3 |
| DC pass | Output → input |
| Maximum voltage | 40 V |
| Maximum current | 300 mA |
| Earthing connection | Earthing screw |
📺 Signal and attenuation
| Output / feature | TERR | SAT |
|---|
| W1* | 8.5 dB | 7.5 dB |
| W2 | 8.5 dB | 7.5 dB |
| W3 | 5 dB | 4 dB |
| Isolation between outputs | >15 dB | >15 dB |
TERR refers to the terrestrial signal band and SAT to the satellite signal band.
The first attenuation row has no output label in the supplied data and is shown as W1 based on the table sequence.
⚙️ Technical specifications
| Feature | Specification |
|---|
| Manufacturer | Televes |
| Article number | 543603 |
| Product type | 3-way Mini splitter |
| Frequency range | 5–2400 MHz |
| Connection system | EasyF |
| Impedance | 75 Ω |
| Shielding | Class A |
| W1/W2 attenuation, TERR | 8.5 dB |
| W1/W2 attenuation, SAT | 7.5 dB |
| W3 attenuation, TERR | 5 dB |
| W3 attenuation, SAT | 4 dB |
| Isolation between outputs | >15 dB |
| DC pass | Output → input |
| Maximum voltage | 40 V |
| Maximum current | 300 mA |
| Mounting | Wall mounting tabs |
| Earthing provision | Earthing screw |
📦 Package contents
- 1 × Televes 543603 EasyF antenna splitter with three outputs.
🔧 Compatible accessories
- 75 Ω coaxial cable suitable for the installation frequency range.
- EasyF termination resistors for unused outputs.
- Suitable mounting enclosure for the installation environment.
- Earthing conductor for connection to the earthing screw.
