Amplify satellite and terrestrial TV signals on one cable with the Spaun NVF 115 F. Featuring one broadband input and one output, it suits installations where both signal types are already carried on a shared coaxial cable.
The amplifier provides 7–10 dB gain within 47–862 MHz for terrestrial signals and 10–15 dB gain within 950–2200 MHz for satellite IF signals. It can help compensate for signal loss through cabling and downstream distribution components.
DC pass-through, 22 kHz tone and DiSEqC pass-through allow power and control signals to reach the LNB and compatible satellite equipment. The amplifier is powered through the coaxial cable at 14–20 V.
Its compact housing features F connections and mounting points for a fixed antenna installation.
✅ Product Benefits
- Amplifies satellite and terrestrial TV signals.
- One input and one output for a shared signal cable.
- 7–10 dB terrestrial gain.
- 10–15 dB satellite gain.
- DC pass-through up to 1 A.
- Pass-through for 22 kHz tone and DiSEqC.
- Remote power through coaxial cable.
- F connections and mounting points.
🎯 Ideal For
- Installations carrying combined TV and satellite signals.
- Cable runs requiring compensation for signal loss.
- Satellite systems with compatible LNB power.
- Installations using DiSEqC control.
- Upgrading existing TV/SAT distribution.
🔧 Connection and Operation
Connect the incoming signal to the amplifier’s input. Connect the output marked towards the receiver to the downstream installation.
The amplifier requires 14–20 V through the coaxial cable from a compatible receiver or remote power supply. Check that sufficient current is available for both the amplifier and any connected LNB.
When using TV and satellite together, the signals must be combined before the amplifier. It does not have separate inputs for combining two cable feeds.
📡 Capacity and Connections
| Feature | Specification |
|---|
| Inputs | 1 |
| Outputs | 1 |
| Connector type | Female F |
| Terrestrial band | 47–862 MHz |
| Satellite band | 950–2200 MHz |
| Power | Through coaxial cable, 14–20 V |
| DC pass-through | Max. 1 A |
| Control pass-through | 22 kHz and DiSEqC |
📺 Signal and Amplification
| Signal Band | Frequency Range | Gain |
|---|
| Terrestrial | 47–862 MHz | 7–10 dB |
| Satellite IF | 950–2200 MHz | 10–15 dB |
Specified maximum terrestrial output level: 106 dBµV at 60 dB IMA3 according to EN 60728-3.
Specified maximum satellite output level: 112 dBµV at 35 dB IMA3 according to EN 60728-3.
The amplifier increases signal level. Results also depend on incoming signal quality, cable loss and installation position.
⚙️ Technical Specifications
Brand: Spaun
Model: NVF 115 F
Manufacturer’s article number: 814117
Product type: Satellite and terrestrial TV amplifier
Inputs/outputs: 1 / 1
Connections: Female F
Terrestrial frequency range: 47–862 MHz
Satellite IF frequency range: 950–2200 MHz
Terrestrial gain: 7–10 dB
Satellite IF gain: 10–15 dB
Maximum terrestrial output level: 106 dBµV, 60 dB IMA3 / EN 60728-3
Maximum SAT output level: 112 dBµV, 35 dB IMA3 / EN 60728-3
Supply voltage: 14–20 V
Current consumption shown on product image: 210 mA
DC pass-through: Max. 1 A
Control pass-through: 22 kHz and DiSEqC
Operating temperature: −20 to +50 °C
Dimensions: 150 × 90 × 35 mm
📦 Package Contents
- 1 × Spaun NVF 115 F satellite and terrestrial TV amplifier.
