This Triple Monoblock Single LNB is designed for simultaneous reception from three popular satellite positions: Hotbird 13°E, Eutelsat 16°E and Astra 19.2°E. This combination is particularly useful for receiving a broad selection of European and Balkan satellite channels using one offset dish.
The product combines three LNB feed sections and an integrated DiSEqC switch in one compact unit. The satellite receiver selects the required orbital position using DiSEqC 1.0, eliminating the need for a separate external DiSEqC switch.
The LNB has one output and is intended for one independent satellite receiver or tuner. A dish measuring approximately 90 cm is recommended for this satellite combination. The unit has a 23 mm mounting section and includes an adapter ring for installation in a compatible 40 mm LNB holder.
✅ Product Benefits
Receives three satellite positions using one dish
Designed for Hotbird 13°E, Eutelsat 16°E and Astra 19.2°E
Suitable for European and Balkan satellite channels
Three LNB feed sections in one integrated unit
Integrated DiSEqC 1.0 switch
One output for one receiver or tuner
No separate external DiSEqC switch required
Universal low- and high-band operation
Supports vertical and horizontal polarisation
23 mm mounting section with included 40 mm adapter ring
Recommended for an approximately 90 cm offset dish
Satellite positions and DiSEqC ports are marked on the LNB
🎯 Ideal For
Receiving Balkan satellite channels
Hotbird 13°E
Eutelsat 16°E
Astra 19.2°E
Homes requiring three satellites from one dish
Installations with one satellite receiver
Televisions with integrated DVB-S/DVB-S2 tuners
Offset dishes measuring approximately 90 cm
Installations where an external DiSEqC switch should be avoided
🛰️ Satellite Positions and DiSEqC Configuration
| Orbital position | Common satellite designation | DiSEqC 1.0 position |
|---|
| 16°E | Eutelsat 16A | Sat A / Port A |
| 13°E | Hotbird | Sat B / Port B |
| 19.2°E | Astra 1 | Sat C / Port C |
The receiver must be configured using these DiSEqC positions to switch correctly between the three satellites.
Satellite names and channel line-ups may change over time. Check current transponder and channel information in the receiver or with the relevant service provider.
🔧 Installation and Connection
The LNB assembly is installed on a compatible offset dish. A dish size of approximately 90 cm is recommended, although the final reception result also depends on geographical location, satellite footprints, dish quality and installation accuracy.
The mounting section has a 23 mm diameter. The included adapter ring is used when fitting the product in a compatible 40 mm LNB holder. According to the supplied product information, the holder profile should be approximately 7 mm.
Connect a coaxial cable between the LNB output and the satellite receiver. Configure the receiver’s antenna settings as follows:
As this is a Single LNB, it supports one receiver or independent tuner. A receiver with multiple tuners may require additional independent LNB outputs for full functionality.
Accurate alignment is especially important because the same unit must receive three closely spaced orbital positions. Professional installation is recommended where reception margins are limited.
📡 Polarisation and Band Control
| Function | Control signal |
|---|
| Vertical polarisation | 13V |
| Horizontal polarisation | 18V |
| Low band | 0 kHz |
| High band | 22 kHz |
| Eutelsat 16°E | DiSEqC 1.0 – Sat A |
| Hotbird 13°E | DiSEqC 1.0 – Sat B |
| Astra 19.2°E | DiSEqC 1.0 – Sat C |
⚙️ Technical Specifications
Product type: Triple Monoblock Single Universal LNB
Number of satellite positions: 3
Satellite positions: Hotbird 13°E, Eutelsat 16°E and Astra 19.2°E
Number of outputs: 1
Directly connected receivers/tuners: 1
Satellite switching: DiSEqC 1.0
DiSEqC configuration: A = 16°E, B = 13°E, C = 19.2°E
Recommended dish size: Approximately 90 cm
Dish type: Offset
Mounting diameter: 23 mm
Included adapter: 40 mm adapter ring
Recommended holder profile: Approximately 7 mm
Low-band input frequency: 10.7–11.7 GHz
Low-band output frequency: 950–1950 MHz
Low-band LO frequency: 9.75 GHz
High-band input frequency: 11.7–12.75 GHz
High-band output frequency: 1100–2150 MHz
High-band LO frequency: 10.6 GHz
Noise figure: 1.0 dB maximum
Initial LO accuracy: ±1.0 MHz
LO temperature drift: ±3.0 MHz
LO phase noise at 1 kHz: −55 dBc/Hz
LO phase noise at 10 kHz: −80 dBc/Hz
LO phase noise at 100 kHz: −100 dBc/Hz
Conversion gain: 50–62 dB
Gain variation: 6 dB maximum
Output 1 dB compression point: 0.0 dBm minimum
Crosstalk isolation: 20 dB minimum
Output VSWR: Up to 2.5:1
Output intermodulation products: −55 dBm maximum
Supply voltage: 10–20V DC
Power consumption: 150 mA maximum
Operating temperature: −30 to +60°C
Output impedance: 75 Ω
Output connector: Female F-type
📦 Package Contents
