The Tele System 85 cm is a stable, high-gain offset satellite dish designed for digital satellite television reception. Its generous reflector area provides a useful signal reserve, making it particularly suitable for locations with weaker satellite signals or for receiving satellites with lower signal strength at the installation site.
The reflector measures 880 × 880 mm externally and provides gain of up to 39.5 dB at 12.75 GHz. Its narrow beamwidth helps separate nearby satellite positions when the dish is installed correctly and aligned accurately.
The dish can be combined with a Single, Twin or Quad LNB depending on the number of receivers or tuners required. It can also be expanded with a compatible multi-feed bracket for reception from several satellite positions using the same reflector.
Its robust construction includes a galvanised steel AZ/EL mount, an aluminium LNB arm and an LNB holder compatible with 23 or 40 mm feed diameters. The mast clamp is suitable for poles measuring 32–76 mm in diameter.
✅ Product Benefits
- Large offset dish with external dimensions of 880 × 880 mm
- High antenna gain of up to 39.5 dB
- Useful signal reserve under weaker reception conditions
- Suitable for digital Ku-band satellite television
- Compatible with Single, Twin and Quad LNBs
- Prepared for compatible multi-feed solutions
- Supports reception from several satellite positions
- LNB holder for 23 and 40 mm feed diameters
- Mast clamp for poles measuring 32–76 mm
- Galvanised steel AZ/EL mount
- Stable aluminium LNB arm
- Designed for permanent outdoor installation
- Available in different reflector materials and colours depending on version
🛰️ Multi-Satellite Reception
The dish can be expanded with a compatible multi-feed kit for receiving several satellite positions using the same reflector. Under suitable reception conditions, the system may be configured for up to four orbital positions separated by approximately 6°.
Examples of common satellite combinations include:
- Astra 19.2° East and Hot Bird 13° East
- Thor 0.8° West and Astra 4.8° East
- Other compatible satellite positions with suitable orbital separation
Compatible combinations depend on geographical location, satellite footprint, the selected LNB arrangement and accurate alignment.
👥 Choosing the Correct LNB
The number of receivers or tuners that can be connected depends on the installed LNB:
- Single LNB: One receiver or tuner
- Twin LNB: Two independent receivers or tuners
- Quad LNB: Up to four independent receivers or tuners
- Quattro LNB: Used together with an external multiswitch
Please note: Quad and Quattro LNBs perform different functions. A Quattro LNB is designed for a multiswitch and should not be connected directly to four conventional receivers.
🎯 Ideal For
- Houses and townhouses
- Holiday homes and permanent residences
- Locations with weaker satellite signals
- Reception of Astra, Hot Bird, Thor and other Ku-band satellites
- Installations with one or several satellite receivers
- Twin-tuner receivers
- Multi-feed installations
- Permanent mast and wall installations
- Customers seeking improved bad-weather signal reserve
🔧 Installation
Install the dish on a stable mast or suitable wall bracket. The mast clamp accommodates poles measuring 32–76 mm in diameter.
After installation, adjust the reflector to the correct azimuth and elevation for the required satellite. The elevation adjustment range is 5–45°. Precise alignment using a satellite meter is recommended for optimum reception.
Install a compatible LNB with a 23 or 40 mm feed diameter and connect it to the receiver using suitable 75-ohm coaxial cable.
⚙️ Technical Specifications
Product type: Offset dish for satellite reception
Brand: Tele System
Nominal size: 85 cm
External reflector dimensions: 880 × 880 mm
Gain at 10.75 GHz: 38.1 dB
Gain at 11.75 GHz: 38.7 dB
Gain at 12.75 GHz: 39.5 dB
Half-power beamwidth at 12.75 GHz: Less than 2.1°
On-axis cross-polar discrimination: Greater than 27 dB
F/D ratio: 0.6
Offset angle: 21.5°
Elevation range: 5–45°
Elevation with pass-through pole: 43°
Mast diameter: 32–76 mm
Feed diameter: 23/40 mm
Wind load at 72 km/h: 21 kg
Wind load at 144 km/h: 85 kg
Wind load at 216 km/h: 192 kg
Available reflector materials: Steel or aluminium, depending on version
Available colours: White, anthracite or red, depending on version
Rear mount: Plastic
AZ/EL mount: Galvanised steel
LNB arm: Aluminium, 48 × 22 mm
LNB holder: Plastic
Operating environment: Outdoor use
📦 Package Contents
- 1 × Tele System 85 cm offset reflector
- 1 × AZ/EL mount
- 1 × LNB arm
- 1 × LNB holder for 23/40 mm feed diameter
- Mast clamp and installation hardware according to the supplied configuration
Please note: LNB, multi-feed kit, mast, wall bracket, coaxial cable, F-connectors and satellite receiver are not included unless explicitly stated in the retailer’s offer.
🔧 Compatible Accessories
- Single LNB
- Twin LNB
- Quad LNB
- Quattro LNB and multiswitch
- Monoblock LNB
- Multi-feed bracket and side-feed kit
- Mast pole and wall bracket
- 75-ohm coaxial cable
- F-connectors
- Weather-resistant connector protection
- Satellite finder or professional alignment meter
- Earthing and equipotential bonding equipment
⚠️ Important Information
- Confirm the reflector material and colour of the selected product version.
- An LNB is not included unless explicitly stated.
- The number of receivers depends on the selected LNB and distribution system.
- A Quad LNB allows direct connection of up to four tuners.
- A Quattro LNB requires a compatible multiswitch.
- Multi-feed reception requires a compatible bracket and additional LNBs.
- An unobstructed view towards the required satellite is essential.
- Trees, buildings and other obstacles may weaken or block reception.
- The stated wind loads are load values and not guaranteed maximum wind speeds for the complete installation.
- The mast, wall bracket and fixings must be dimensioned for the dish’s wind load.
- Follow applicable earthing and equipotential bonding requirements.
- Professional installation is recommended when uncertain.
