The Tele System 110 cm is a large, high-gain offset satellite dish designed for digital satellite television reception. Its generous reflector area provides excellent antenna gain and useful signal reserve, making it particularly suitable for locations with weaker satellite signals or for receiving satellites with lower signal strength at the installation site.
The reflector measures 1090 × 991 mm externally and provides gain of up to 40.9 dB at 12.75 GHz. Its narrow beamwidth of less than 1.8° supports accurate satellite separation and stable reception when the dish is installed correctly and aligned precisely.
The dish can be combined with a Single, Twin or Quad LNB depending on the number of receivers or tuners required. For larger distribution systems, a Quattro LNB can be used together with a compatible multiswitch.
The Tele System 110 cm can also be expanded with a suitable multi-feed kit for reception from several satellite positions using the same reflector. Its construction includes a robust galvanised steel AZ/EL mount, a galvanised steel LNB arm and an LNB holder compatible with 23 or 40 mm feed diameters.
✅ Product Benefits
- Large offset dish measuring 1090 × 991 mm externally
- High antenna gain of up to 40.9 dB
- Useful signal reserve under weaker reception conditions
- Suitable for digital Ku-band satellite television
- Compatible with Single, Twin and Quad LNBs
- Suitable for Quattro LNB and external multiswitch systems
- Prepared for compatible multi-feed solutions
- Supports reception from several satellite positions
- Narrow beamwidth for accurate satellite separation
- LNB holder for 23 and 40 mm feed diameters
- Mast clamp for poles measuring 32–76 mm
- Galvanised steel AZ/EL mount
- Stable galvanised steel LNB arm
- Designed for permanent outdoor installation
- Available in different reflector materials and colours depending on version
🛰️ Multi-Satellite Reception
The dish can be expanded with a compatible multi-feed kit for receiving several satellite positions using the same reflector. Under suitable reception conditions, the system may be configured for up to four orbital positions separated by approximately 6°.
Examples of possible satellite combinations include:
- Astra 19.2° East and Hot Bird 13° East
- Thor 0.8° West and Astra 4.8° East
- Other compatible satellite positions with suitable orbital separation
Compatible combinations depend on geographical location, satellite footprint, the selected LNB arrangement and accurate alignment.
👥 Choosing the Correct LNB
The number of receivers or tuners that can be connected depends on the installed LNB:
- Single LNB: One receiver or tuner
- Twin LNB: Two independent receivers or tuners
- Quad LNB: Up to four independent receivers or tuners
- Quattro LNB: Used together with an external multiswitch
Please note: Quad and Quattro LNBs perform different functions. A Quattro LNB is designed for a multiswitch and should not be connected directly to four conventional receivers.
🎯 Ideal For
- Houses and townhouses
- Holiday homes and permanent residences
- Locations with weaker satellite signals
- Satellites with weaker coverage at the installation site
- Reception of Astra, Hot Bird, Thor and other Ku-band satellites
- Installations with one or several satellite receivers
- Twin-tuner receivers
- Multi-feed installations
- Multiswitch distribution systems
- Permanent mast and wall installations
- Customers seeking improved bad-weather signal reserve
🔧 Installation
Install the dish on a stable mast or a strong and suitable wall bracket. The mast clamp accommodates poles measuring 32–76 mm in diameter.
After installation, adjust the reflector to the correct azimuth and elevation for the required satellite. The elevation adjustment range is 10–55°. Precise alignment using a professional satellite meter is recommended for optimum reception.
Install a compatible LNB with a 23 or 40 mm feed diameter and connect it to the receiver or distribution system using suitable 75-ohm coaxial cable.
Because of the dish’s size and wind load, the mast, wall bracket and fixings must be dimensioned correctly.
⚙️ Technical Specifications
Product type: Offset dish for satellite reception
Brand: Tele System
Nominal size: 110 cm
External reflector dimensions: 1090 × 991 mm
Gain at 10.75 GHz: 39.8 dB
Gain at 11.75 GHz: 40.5 dB
Gain at 12.75 GHz: 40.9 dB
Half-power beamwidth at 12.75 GHz: Less than 1.8°
On-axis cross-polar discrimination: Greater than 27 dB
F/D ratio: 0.55
Offset angle: 25°
Elevation range: 10–55°
Elevation with pass-through pole: 48°
Mast diameter: 32–76 mm
Feed diameter: 23/40 mm
Wind load at 72 km/h: 30 kg
Wind load at 144 km/h: 119 kg
Wind load at 216 km/h: 268 kg
Available reflector materials: Steel or aluminium, depending on version
Available colours: White or anthracite, depending on version
Rear mount: Plastic
AZ/EL mount: Galvanised steel
LNB arm: Galvanised steel, approximately 30 × 15 mm
LNB holder: Plastic
Operating environment: Outdoor use
📦 Package Contents
- 1 × Tele System 110 cm offset reflector
- 1 × AZ/EL mount
- 1 × LNB arm
- 1 × LNB holder for 23/40 mm feed diameter
- Mast clamp and installation hardware according to the supplied configuration
Please note: LNB, multi-feed kit, mast, wall bracket, coaxial cable, F-connectors and satellite receiver are not included unless explicitly stated in the retailer’s offer.
🔧 Compatible Accessories
- Single LNB
- Twin LNB
- Quad LNB
- Quattro LNB and multiswitch
- Monoblock LNB
- Multi-feed bracket and side-feed kit
- Heavy-duty mast pole or wall bracket
- 75-ohm coaxial cable
- F-connectors
- Weather-resistant connector protection
- Satellite finder or professional alignment meter
- Earthing and equipotential bonding equipment
⚠️ Important Information
- Confirm the reflector material and colour of the selected product version.
- An LNB is not included unless explicitly stated.
- The number of receivers depends on the selected LNB and distribution system.
- A Quad LNB allows direct connection of up to four tuners.
- A Quattro LNB requires a compatible multiswitch.
- Multi-feed reception requires a compatible bracket and additional LNBs.
- An unobstructed view towards the required satellite is essential.
- Trees, buildings and other obstacles may weaken or block reception.
- The stated wind loads are load values and not guaranteed maximum wind speeds for the complete installation.
- The mast, wall bracket and fixings must be dimensioned for the dish’s size and wind load.
- Confirm that the mounting surface can support the installation’s mechanical load.
- Follow applicable earthing and equipotential bonding requirements.
- Professional installation is recommended.
