The Gibertini 150 cm offset satellite dish is a large, wind-stable antenna designed for installations where high signal gain and a strong reception margin are required. It is particularly suitable for receiving weaker satellite signals and for professional or demanding satellite installations.
The reflector is manufactured from aluminium, providing a good combination of low weight, corrosion resistance and mechanical stability. The rear mounting assembly is manufactured from galvanised steel, while the feed arm is made from aluminium.
The dish provides a specified gain of 43.3 dB at 10.95 GHz. Its elevation can be adjusted from 20 to 50 degrees, and the mast clamp is suitable for poles measuring 55–100 mm in diameter.
The supplied feed holder accepts LNBs with a standard 40 mm neck diameter. The LNB is not included and must be selected separately according to the requirements of the satellite system.
✅ Product Benefits
- Large 150 cm offset dish for demanding reception conditions
- High gain of 43.3 dB at 10.95 GHz
- Suitable for receiving weaker satellite signals
- Aluminium reflector
- Wind-stable construction
- Galvanised steel mounting assembly
- Aluminium feed arm
- Adjustable elevation from 20 to 50 degrees
- Mast clamp for poles measuring 55–100 mm
- Standard 40 mm LNB holder
- Wide operating temperature range from −30 to +70°C
- Discreet light-grey finish
🎯 Ideal For
- Receiving weaker satellite signals
- Satellites with low signal strength at the installation location
- Professional satellite installations
- Permanent mast or heavy-duty wall installations
- Systems requiring a large reception margin
- Homes, apartment buildings and commercial properties
- Single-receiver and multi-receiver systems
- Locations where a smaller satellite dish cannot provide sufficient signal
🔧 Installation
The satellite dish must be installed on a stable mast or a suitably rated wall bracket. The mast clamp is designed for poles measuring 55–100 mm in diameter.
Because of the antenna’s size and wind load, the mast, wall bracket, fixings and building structure must be properly dimensioned for the installation. Carefully align the dish with the required satellite and adjust its elevation according to the installation location.
Install a compatible LNB with a 40 mm neck diameter in the feed holder. Connect a suitable 75-ohm coaxial cable between the LNB and the satellite receiver or distribution system.
Professional installation is recommended because of the dish’s size, weight and wind load.
⚙️ Technical Specifications
Product type: Offset dish for satellite reception
Manufacturer: Gibertini
Nominal size: 150 cm
Overall dimensions: Approximately 155 × 166 cm
Colour: Light grey
Antenna gain: 43.3 dB at 10.95 GHz
Elevation range: 20–50°
Compatible mast diameter: 55–100 mm
Feed mount: 40 mm
Wind load at 120 km/h: 235 kg
Operating temperature: −30 to +70°C
Reflector material: Aluminium
Feed arm material: Aluminium
Mounting assembly material: Galvanised steel
Feed holder material: Hard plastic
Packaging: Individually packed
Product number: 11125-009
EAN: 4043089031066
📦 Package Contents
- 1 × Light-grey Gibertini 150 cm aluminium reflector
- 1 × Mast and rear mounting assembly
- 1 × Aluminium feed arm
- 1 × Feed holder for a 40 mm LNB
Please note: LNB, mast, wall bracket, coaxial cable, connectors, satellite receiver and other installation materials are not included.
🔧 Compatible Accessories
- Universal LNB with a 40 mm neck diameter
- Single, Twin, Quad or Quattro LNB
- Heavy-duty antenna mast or suitably rated wall bracket
- UV-resistant 75-ohm coaxial cable
- Compression connectors or F-connectors
- Satellite receiver
- DiSEqC switch
- Multiswitch for larger distribution systems
- Earthing and equipotential bonding components
- Satellite signal meter
⚠️ Important Information
- The LNB is not included.
- This product is supplied as a bulky freight item.
- The stated 150 cm measurement is the product’s nominal size.
- The specified overall dimensions are approximately 155 × 166 cm.
- The mast or wall bracket must be rated for the dish’s size and wind load.
- The specified wind load is 235 kg at a wind speed of 120 km/h.
- Check the load-bearing capacity of the building structure before installation.
- Use suitable corrosion-resistant fixings.
- Follow local requirements for earthing, equipotential bonding and lightning protection.
- Do not install the dish where it could cause injury or property damage if it becomes detached.
- Inspect all brackets and fasteners regularly.
- Professional installation is recommended.
