The Inverto Black Pro Quad Monoblock 6° is a universal monoblock LNB designed for simultaneous reception from two satellite positions separated by approximately six degrees. It is especially suitable for the popular combination of Hotbird 13°E and Astra 19.2°E using a single satellite dish.
The LNB has four independent outputs and can be connected directly to up to four satellite receivers or tuners. Each connected tuner can independently select the satellite position, polarisation and frequency band.
Its two feedhorns and integrated DiSEqC 1.0 switch replace two separate Universal LNBs, a multifeed bracket and an external DiSEqC switch. This provides a compact and convenient solution for receiving two satellites.
The model has a 23 mm mounting neck and includes an adapter ring for installation in a standard 40 mm LNB holder. A dish measuring approximately 80 cm is recommended for Astra and Hotbird reception.
✅ Product Benefits
Receives two satellite positions separated by approximately 6°
Suitable for Astra 19.2°E and Hotbird 13°E
Four independent outputs
Direct connection of up to four tuners
Integrated DiSEqC switch
Independent satellite selection from every connected tuner
Specified noise figure of 0.2 dB
Gain of up to 62 dB
Universal low- and high-band operation
Compatible with digital satellite television, DVB-S/S2 and HDTV
23 mm mounting neck
23-to-40 mm adapter ring included
Compact alternative to two separate LNBs
Weather-resistant construction for outdoor installation
🎯 Ideal For
Receiving Astra 19.2°E and Hotbird 13°E
Satellite dishes measuring approximately 80 cm
Households with up to four satellite tuners
Four single-tuner satellite receivers
Two twin-tuner receivers
Televisions with integrated DVB-S2 tuners
PVR and recording receivers
Installations receiving two satellites with one dish
Systems where separate LNBs and DiSEqC switches are undesirable
🛰️ Satellite Combination and DiSEqC
The LNB is designed for two satellite positions separated by approximately 6°. The most common combination is:
| Satellite position | Example |
|---|
| 13°E | Hotbird |
| 19.2°E | Astra |
The satellite positions are selected in the receiver’s antenna settings using DiSEqC 1.0.
The precise DiSEqC assignment can depend on the mounting orientation and the satellite at which the dish is aligned. Check the markings on the product and test ports A and B during installation if necessary.
🔧 Connection and Operation
The monoblock is installed in the dish’s LNB holder. The built-in feedhorn spacing is designed for satellite positions separated by approximately six degrees when used with a suitable offset dish.
Each F-output is connected by its own coaxial cable to a satellite receiver or tuner. The outputs operate independently, allowing users to watch different channels and satellite positions simultaneously.
A twin-tuner receiver normally requires two separate coaxial cables and therefore uses two LNB outputs for fully independent viewing and recording.
For the best performance, the dish size, antenna geometry, local signal strength and receiver DiSEqC settings must suit the installation.
📡 Capacity
| Installation | Capacity |
|---|
| Single-tuner receivers | Up to 4 |
| Twin-tuner receivers | Up to 2 |
| Mixed installation | Maximum of 4 independent tuners |
| Satellite positions | 2 |
| Physical outputs | 4 |
Please note: Capacity is calculated by the number of tuners. A multi-tuner receiver may therefore use more than one LNB output.
⚙️ Technical Specifications
Product type: Universal Quad Monoblock LNB
Product range: Inverto Black Pro
Model: IDLB-QUDM21-MNOO6-8PP
Satellite positions: 2
Satellite spacing: Approximately 6°
Recommended combination: Hotbird 13°E and Astra 19.2°E
Number of outputs: 4 independent outputs
Maximum directly connected tuners: 4
Integrated switch: Yes
Satellite selection: DiSEqC 1.0
Polarisation selection: 13/18V
Band switching: 0/22 kHz
Input frequency: 10.70–12.75 GHz
Low band: 10.70–11.70 GHz
High band: 11.70–12.75 GHz
Low-band IF output: 950–1950 MHz
High-band IF output: 1100–2150 MHz
Low-band LO frequency: 9.75 GHz
High-band LO frequency: 10.60 GHz
Noise figure: 0.2 dB
Gain: Up to 62 dB
Mounting neck: 23 mm
Included adapter: 23 to 40 mm
Recommended dish size: Approximately 80 cm
Output impedance: 75 Ω
Output connections: 4 × female F-connectors
DVB-S/S2-compatible: Yes
HDTV-compatible: Yes
Product number: 12617
EAN: 5453002610152
📦 Package Contents
