If you have any questions regarding our products, contact us at 08-28 09 09

GT-SAT GT-WB1 Wideband LNB – V/H Outputs and 10.41 GHz LO | Black

395 kr
Available
Not available
Only a few left (0 items)
Not available

Enter your e-mail address below and we will notify you when the product is available! Your e-mail address will be stored up to 180 days.

Product Description:

The GT-SAT GT-WB1 is a Wideband LNB designed for modern satellite installations using a compatible Wideband multiswitch or dCSS/Unicable system. Unlike a conventional Quattro LNB, which requires four outputs per satellite position, this LNB delivers the complete satellite band through only two outputs: one for vertical and one for horizontal polarisation.

Wideband technology converts the low and high bands of each polarisation into a continuous output range of 290–2340 MHz. A compatible Wideband multiswitch therefore requires only two signal inputs per satellite position instead of four.

The GT-WB1 has a 10.41 GHz local oscillator, a specified typical noise figure of only 0.1 dB and a gain of 56–62 dB. Its standard mounting arrangement and 42 mm feed-neck length make it suitable for many conventional satellite dishes.

This is an installation LNB for Wideband systems and should normally not be connected directly to a conventional satellite receiver. The signal must be processed by a compatible Wideband multiswitch, dCSS unit or other equipment designed for Wideband LNBs.


✅ Product Benefits

  • Complete Wideband LNB for modern distribution systems

  • Two separate outputs for vertical and horizontal polarisation

  • Only two cables required per satellite position

  • Replaces four signal paths from a conventional Quattro LNB

  • Simultaneous transmission of the complete low and high bands

  • Output frequency range from 290 to 2340 MHz

  • 10.41 GHz local oscillator

  • Low specified noise figure of 0.1 dB

  • Gain of 56–62 dB

  • Cross-polarisation isolation of 22 dB

  • Low power consumption of no more than 1W

  • Standard mounting neck

  • 42 mm feed-neck length

  • Operating temperature from −30 to +60°C

  • Suitable for compatible Wideband, dCSS and Unicable systems


🎯 Ideal For

  • Wideband multiswitches

  • Compatible dCSS and Unicable multiswitches

  • Installations where fewer cables are required from the dish

  • Reception from one or more satellite positions

  • Houses and multi-dwelling properties

  • Centralised satellite television systems

  • Professional antenna installations

  • New installations and satellite-system upgrades

  • Satellite dishes with a compatible LNB holder


🔧 Connection and Operation

The GT-WB1 has two F-outputs:

  • V: Complete satellite band with vertical polarisation

  • H: Complete satellite band with horizontal polarisation

Both outputs are connected by separate coaxial cables to the corresponding Wideband inputs on a compatible multiswitch. The multiswitch then processes and distributes the signals to receivers or Unicable tuners.

A conventional Quattro LNB requires four cables per satellite position: vertical low, horizontal low, vertical high and horizontal high. The GT-WB1 requires only two cables because the complete frequency range for each polarisation is available through one output.

This LNB must not be confused with a Twin LNB. Although the product has two F-connectors, they are not two independent Universal LNB outputs for directly connecting two receivers.


📡 Comparison with a Conventional Quattro LNB

FunctionGT-WB1 WidebandConventional Quattro LNB
Cables per satellite position24
Vertical polarisationComplete band through one outputSplit into low and high bands
Horizontal polarisationComplete band through one outputSplit into low and high bands
LO frequency10.41 GHzUsually 9.75/10.60 GHz
Direct connection to receiverNoNo
Compatible multiswitch requiredYes, WidebandYes, Quattro

⚙️ Technical Specifications

Product type: Wideband LNB

Model: GT-WB1

Colour: Black

Satellite positions: 1

Number of outputs: 2

Outputs: Vertical and horizontal polarisation

Input frequency: 10.70–12.75 GHz

Output frequency: 290–2340 MHz

Local oscillator frequency: 10.41 GHz

LO stability at room temperature: ±0.5 MHz

LO phase noise at 100 kHz: −97 dBc

Typical noise figure: 0.1 dB

Gain: 56–62 dB

Gain flatness over 26 MHz: 0.5 dB

Cross-polarisation isolation: 22 dB

Image rejection: Specified as 40 dB

Power consumption: Maximum 1W

Connector type: F-type

Number of F-connectors: 2

Feed-neck length: 42 mm

Operating temperature: −30 to +60°C

Compatibility: Wideband multiswitch or compatible dCSS/Unicable system

Product number: 10012

EAN: 5453001611501


📦 Package Contents

  • 1 × GT-SAT GT-WB1 Wideband LNB



Recommended accessories for this item

Recently viewed products

The product has been added to your cart