GT-SAT GT-dLNB2T Unicable II LNB – 2 × 16 User Bands and DVB-T/T2 Input | 4K/UHD

The GT-SAT GT-dLNB2T is a professional, programmable Unicable II/dCSS LNB featuring two outputs and a separate input for a terrestrial DVB-T/T2 signal.

In full Unicable operation, the LNB provides 16 user bands per output, supporting up to 32 compatible tuners across two coaxial cables. Each cable branch can be divided further using Unicable-compatible splitters to supply multiple receivers or rooms.

One output is a dedicated SCR/dCSS output. The second is a hybrid output that automatically operates as either SCR/dCSS or Legacy. If only 16 user bands are required, the hybrid output can supply one conventional satellite receiver. Switching to Legacy mode is automatic and requires no separate programming.

The DVB-T/T2 input allows the signal from a terrestrial antenna to be combined with the satellite signal. Satellite and terrestrial television can therefore be distributed through the same coaxial network and separated at the receiver location using a suitable outlet or filter.

The GT-dLNB2T supports EN50494, EN50607 and dHello. The first eight user bands on each output can be used by EN50494 receivers. EN50607- or dHello-compatible equipment is required to use all 16 user bands on each output.

Using the separately available GT-SAT GT-DC2 dController, the LNB can be reprogrammed and configured for static transponder distribution.

✅ Product Benefits

• Two outgoing cable branches

• 16 user bands per output

• Total capacity of up to 32 compatible tuners

• One dedicated SCR/dCSS output

• One automatic SCR/dCSS or Legacy hybrid output

• One conventional receiver can use the hybrid output

• Automatic Legacy switching without programming

• DVB-T/T2 input for terrestrial television

• Satellite and terrestrial signals over the same coaxial network

• Supports EN50494

• Supports EN50607 and dHello

• Dynamic and programmable static operation

• Programmable using the GT-SAT GT-DC2 dController

• Very low typical noise figure of 0.1 dB

• HDTV-, DVB-S2- and 4K/UHD-compatible

• Standard 40 mm mounting neck

• Extendable weather cover

🎯 Ideal For

• Homes with many satellite tuners

• Two separate cable branches or residential areas

• Multi-dwelling installations

• Multi-tuner satellite receivers

• Enigma2 receivers with FBC tuners

• PVR and recording receivers

• Televisions with Unicable-compatible tuners

• Combined satellite and DVB-T/T2 distribution

• Installations with limited coaxial cabling

• Systems that also require a conventional satellite receiver

• Programmable headend and distribution systems

🔧 Connection and Operation

The GT-dLNB2T has three F-connectors:

• dCSS: SCR/dCSS output with up to 16 user bands

• Hybrid: SCR/dCSS output with up to 16 user bands or one Legacy output

• Terr: Input for a terrestrial DVB-T/T2 signal

When both outputs operate in dCSS mode, up to 16 tuners can be connected to each cable branch, providing a total capacity of up to 32 tuners. The same user-band frequency set can be reused on the second output because the outputs are separate.

When the hybrid output operates in Legacy mode, the system can supply up to 16 Unicable tuners through the dedicated dCSS output and one conventional receiver through the hybrid output.

Each tuner on the same cable branch must use a unique user band. Two tuners on the same output must not be assigned the same user band.

📡 Capacity and Operating Modes

Please note: The 32 user bands are distributed as 16 user bands on each of two independent outputs.

⚙️ Technical Specifications

Product type: Programmable Unicable II/dCSS hybrid LNB

Model: GT-dLNB2T

Satellite positions: 1

SCR/dCSS outputs: 1

SCR/dCSS or Legacy hybrid outputs: 1

DVB-T/T2 inputs: 1

User bands per dCSS output: 16

Total capacity in dCSS mode: Up to 32 tuners

Capacity in dCSS/Legacy mode: Up to 16 Unicable tuners and 1 Legacy receiver

Protocols: EN50494, EN50607 and dHello

Communication: DiSEqC 2.0

Operating modes: Dynamic or static

Automatic Legacy switching: Yes, on the hybrid output

Programmable: Yes, using the GT-DC2 dController

Typical noise figure: 0.1 dB

Gain: 42–62 dB

SCR gain flatness: ±0.2 dB over 26 MHz and temperature

SCR gain variation: 1 dB over temperature

Cross-polarisation isolation: More than 25 dB over temperature

Image rejection: More than 40 dB over temperature

Supply voltage: 10–20V

Power consumption: 4.70W

Mounting diameter: 40 mm

Feed-neck length: 42 mm

Operating temperature: −30 to +65°C

Weather protection: Extendable connector cover

HDTV-compatible: Yes

DVB-S2-compatible: Yes

4K/UHD-compatible: Yes

Connections: 3 × F-connectors

Product number: 13521

EAN: 5453001615639

📻 SCR Frequencies

The following user bands are available on each dCSS output:

• CH01: 1210 MHz

• CH02: 1420 MHz

• CH03: 1680 MHz

• CH04: 2040 MHz

• CH05: 985 MHz

• CH06: 1050 MHz

• CH07: 1115 MHz

• CH08: 1275 MHz

• CH09: 1340 MHz

• CH10: 1485 MHz

• CH11: 1550 MHz

• CH12: 1615 MHz

• CH13: 1745 MHz

• CH14: 1810 MHz

• CH15: 1875 MHz

• CH16: 1940 MHz

CH01–CH08: EN50494 and EN50607/dHello

CH09–CH16: EN50607/dHello

The frequencies can be reused on the second output because each output forms a separate cable branch.

📦 Package Contents

• 1 × GT-SAT GT-dLNB2T Unicable II/dCSS hybrid LNB