The Fuba DAA 850 A is a high-performance 85 cm offset satellite dish designed for customers who prioritise stable satellite reception, long service life and outstanding mechanical quality. Its precision-manufactured aluminium reflector provides a gain of up to 39.53 dB and an excellent reception margin during rain and other demanding weather conditions.
The reflector is manufactured from 1.1 mm aluminium and finished with a durable basalt-grey powder coating in RAL 7012. The antenna back is constructed from galvanised steel with plastic connecting components, while the reflector screws are manufactured from stainless steel. The construction has been tested for wind load and weather resistance.
The 65 cm feed arm provides protected cable routing and features a durable LNB holder manufactured from virtually indestructible die-cast aluminium. An integrated installation compartment on the rear of the antenna can accommodate up to four DiSEqC switches or frequency diplexers. This creates a clean installation while protecting the connections from weather exposure.
The DAA 850 A is supplied with a high level of pre-assembly and a rotation-resistant double mast clamp. This simplifies installation while providing a stable attachment to poles measuring 26–75 mm in diameter.
✅ Product Benefits
- High-performance 85 cm offset satellite dish
- Gain from 38.12 to 39.53 dB
- Excellent reception margin in poor weather
- Precision-manufactured aluminium reflector
- Durable basalt-grey powder coating
- Corrosion-resistant materials
- Tested for wind load and weather resistance
- Rotation-resistant double mast clamp
- Durable die-cast aluminium LNB holder
- Protected cable routing through the feed arm
- Integrated rear installation compartment
- Space for up to four DiSEqC switches or frequency diplexers
- Highly pre-assembled for easier installation
- Elevation adjustment from 0 to 90 degrees
- Suitable for poles measuring 26–75 mm in diameter
- Designed for long-term outdoor installation
🎯 Ideal For
- Satellite television in homes and holiday properties
- Installations requiring a high reception margin
- Locations with heavy rain or changing weather conditions
- Single, Twin, Quad and Quattro LNBs
- Multiswitch installations
- Reception from one or more satellite positions
- DiSEqC installations
- Apartment buildings and communal satellite systems
- Professional and domestic satellite installations
- Permanent mast or wall installations
🔧 Installation
Install the satellite dish on a stable antenna mast or wall bracket that is properly rated for the antenna’s size, weight and wind load. The rotation-resistant double mast clamp accepts poles measuring 26–75 mm in diameter.
Install a compatible LNB with a 40 mm neck diameter in the die-cast aluminium holder. Coaxial cables can be routed safely through the feed arm and into the integrated installation compartment on the rear of the antenna.
The installation compartment can accommodate up to four DiSEqC switches or frequency diplexers, enabling a clean, protected and well-organised installation.
Adjust the azimuth and elevation until the best possible signal strength and signal quality are achieved. A professional satellite signal meter is recommended for accurate alignment.
The mast, wall bracket, fixings and supporting building structure must be rated for the highest expected wind load at the installation location.
⚙️ Technical Specifications
Product type: High-performance offset satellite dish
Manufacturer: Fuba
Model: DAA 850 A
Nominal size: 85 cm
Reflector dimensions: 850 × 850 mm
Colour: Basalt grey, RAL 7012
Rear assembly colour: Grey, regardless of reflector colour
Frequency range: 10.75–12.75 GHz
Gain: 38.12–39.53 dB
Half-power beamwidth at 12.75 GHz: Less than 2.2°
Cross-polarisation isolation: At least 27 dB
Offset angle: 21.5°
F/D ratio: 0.63
Focal length: 53.13 cm
Elevation range: 0–90°
Elevation range with front-of-mast installation: 0–42°
Compatible mast diameter: 26–75 mm
Feed holder: 40 mm
LNB holder: Die-cast aluminium
Feed arm length: 65 cm
Cable routing: Protected inside the feed arm
Installation compartment: Integrated into the antenna rear
Installation compartment capacity: Up to four DiSEqC switches or frequency diplexers
Wind load at 20 m/s: 21.3 kg
Wind load at 40 m/s: 85.4 kg
Wind load at 60 m/s: 192.1 kg
Reflector material: Aluminium
Reflector thickness: 1.1 mm
Reflector finish: Powder-coated
Antenna rear: Galvanised steel with plastic connecting components
Reflector screws: Stainless steel
Wing nuts: Geomet-coated
Mast attachment: Rotation-resistant double mast clamp
Weight: 9.50 kg
Customs tariff number: 85291030
Product number: 11006083
EAN: 8024427006249
📦 Package Contents
- 1 × Basalt-grey Fuba DAA 850 A aluminium reflector
- 1 × Rear assembly with integrated installation compartment
- 1 × 65 cm feed arm with protected cable routing
- 1 × Die-cast aluminium holder for a 40 mm LNB
- 1 × Double mast clamp
- Assembly hardware for the antenna
Please note: LNB, DiSEqC switches, frequency diplexers, antenna mast, wall bracket, coaxial cables, connectors and satellite receiver are not included.
🔧 Compatible Accessories
- Universal LNB with a 40 mm neck diameter
- Single, Twin, Quad or Quattro LNB
- DiSEqC switch
- Frequency diplexer
- Multifeed holder designed for Fuba
- Multiswitch for multiple receivers
- Heavy-duty antenna mast
- Suitably rated wall bracket
- UV-resistant 75-ohm coaxial cable
- F-connectors or compression connectors
- Satellite receiver
- Television with an integrated DVB-S2 tuner
- Earthing and equipotential bonding components
- Satellite signal meter
⚠️ Important Information
- The LNB is not included.
- This product is supplied as a bulky freight item.
- The antenna dimensions are 850 × 850 mm.
- Check the available installation space before ordering.
- The mast or wall bracket must be rated for the antenna’s weight and wind load.
- The specified wind loads are 21.3 kg at 20 m/s, 85.4 kg at 40 m/s and 192.1 kg at 60 m/s.
- The wind-load figures must not be interpreted as guaranteed maximum permissible wind speeds.
- The elevation range with front-of-mast installation is limited to 0–42°.
- Check the load-bearing capacity of the supporting building structure before installation.
- Use suitable corrosion-resistant fixings.
- Follow local requirements for earthing, equipotential bonding and lightning protection.
- Inspect the mast clamp, screws and other mounting components regularly.
- Professional installation is recommended when uncertain.
