The EDISION 10×1 DiSEqC switch connects up to ten LNBs or satellite positions to one satellite receiver through a common coaxial cable.
The switch receives control commands and carries the satellite signal through the same cable. It is particularly suitable for advanced multi-satellite installations using Dreambox, Enigma2 and other receivers supporting extended DiSEqC control.
To select all ten inputs independently, the receiver normally needs to support DiSEqC 1.1 or 2.1, or a compatible combined control mode according to the switch configuration. The product also supports additional DiSEqC commands for individual and combined control functions.
The switch itself has a robust nickel-plated die-cast zinc housing and is supplied inside a weather-protective plastic enclosure. It can therefore be installed indoors or outdoors on a wall or mast.
✅ Product Benefits
Connects up to ten LNBs or satellite positions
Ten SAT inputs and one receiver output
Only one coaxial downlead to the receiver
Supports extended DiSEqC control
Suitable for Dreambox, Enigma2 and Linux receivers
Programmable for different control combinations
Robust die-cast zinc switch housing
Nickel-plated surface for improved durability
Weather-protective plastic enclosure with lid
Suitable for wall or mast installation
Approximately 3 dB insertion loss
DC pass to the selected LNB
Maximum DC pass current of 500 mA
Two-year warranty
🎯 Ideal For
Reception from up to ten satellite positions
Satellite dishes fitted with many separate LNBs
Dreambox and Enigma2 receivers
Linux-based satellite receivers
Receivers supporting DiSEqC 1.1 or 2.1
Advanced multi-satellite installations
Systems using one common downlead
Outdoor installation near the dish or antenna mast
Homes requiring a wide international channel selection
🔧 Connection and Operation
Connect each LNB to a separate SAT input on the switch. Connect the switch output to the tuner input of the satellite receiver using a coaxial cable.
Configure each satellite position in the receiver’s antenna or tuner settings. To access all ten inputs, the receiver should normally be configured for DiSEqC 1.1/2.1 or the combined control mode stated on the switch and in its instructions.
Test every satellite position before closing the weather-protective enclosure. For outdoor installation, route the cables through the housing openings and install the F-connectors correctly to reduce the risk of moisture entering the enclosure.
🔌 Connections and Capacity
| Function | Specification |
|---|
| SAT inputs | 10 |
| Receiver outputs | 1 |
| Satellite positions | Up to 10 |
| Receivers/tuners per switch | 1 |
| Signal and control | Same coaxial cable |
| Installation | Indoors or outdoors in the enclosure |
📡 DiSEqC Control
| Protocol | Application |
|---|
| DiSEqC 1.0/2.0 | Basic selection of up to four positions or part of combined control |
| DiSEqC 1.1/2.1 | Extended input selection for multi-satellite installations |
| DiSEqC 1.2/2.2 | Compatible individual or programmed control functions |
Please note: DiSEqC 1.0 alone does not normally provide independent selection of all ten inputs.
⚙️ Technical Specifications
Product type: Ten-way DiSEqC switch
Manufacturer: EDISION
Model: 10×1 DiSEqC Switch
SAT inputs: 10
Receiver outputs: 1
Frequency range: 950–2150 MHz
Stated protocol support: DiSEqC 1.0, 1.1, 1.2, 2.0, 2.1 and 2.2
Recommended control for ten inputs: DiSEqC 1.1 or 2.1/compatible combined mode
Insertion loss: Approximately 3 dB
Isolation: Minimum 20 dB
Return loss: Minimum 8 dB
Switch power consumption: Approximately 10 mA
Maximum DC pass current: 500 mA
Operating voltage: 12–20V
Input/output impedance: 75 Ω
Connector type: F-type
Switch housing: Nickel-plated die-cast zinc
Outer enclosure: Weather-protective plastic housing
Installation: Wall or mast
Warranty: 2 years
Price: SEK 495
Availability: In stock for immediate delivery
📦 Package Contents
