Use one coaxial cable for TV and satellite with this König TV/SAT combiner. It combines a terrestrial or cable TV signal with a satellite signal into one shared output, simplifying the cable run to the TV connection point.
The combiner has two inputs: one for TV signals within 5–860 MHz and one for satellite signals within 950–2250 MHz. The satellite input connects to a cable from an LNB or DiSEqC switch, while the TV input connects to a suitable antenna or cable TV feed.
At the TV location, the signals are separated using a compatible TV/radio/SAT wall outlet or a suitable signal separator. This provides separate connections for TV and satellite equipment while using one shared cable run.
DC pass-through on the satellite path allows power and control to pass between the receiver and satellite equipment. It is a practical solution for combining two signal types without installing another coaxial cable.
✅ Product Benefits
- TV and satellite over one coaxial cable.
- Two inputs and one shared output.
- Combines terrestrial or compatible cable TV with satellite signals.
- DC pass-through on the satellite path.
- Allows satellite control according to the specified DiSEqC and tone-control support.
- F connections for coaxial cables.
- Practical for upgrading existing cable installations.
🎯 Ideal For
- Installations with both a TV antenna and satellite dish.
- TV locations with one installed coaxial cable.
- Combining satellite and cable TV within the specified frequency ranges.
- Installations using TV/radio/SAT wall outlets.
- Satellite systems with an LNB or DiSEqC switch.
🔧 Connection and Operation
Connect the TV antenna or cable TV feed to the 5–860 MHz input.
Connect the cable from the LNB or DiSEqC switch to the 950–2250 MHz satellite input. Connect the shared output to the coaxial cable running to the TV location.
Separate the signals at the other end using a compatible TV/radio/SAT outlet or signal separator. Connect the TV and satellite receiver to their corresponding outputs.
For satellite power and control, the entire signal path, including the wall outlet or separator, must provide suitable pass-through functionality.
📡 Capacity and Connections
| Feature | Specification |
|---|
| Number of inputs | 2 |
| Shared outputs | 1 |
| TV input | 5–860 MHz |
| SAT input | 950–2250 MHz |
| Connections | F |
| DC pass-through | On the satellite path |
| Shared cable run | 1 coaxial cable |
📺 Signal and Frequency Ranges
The combiner brings two separate frequency ranges onto one cable:
- TV / VHF / UHF: 5–860 MHz.
- Satellite: 950–2250 MHz.
The signals must be separated at the equipment connection point. The combiner does not convert satellite signals into terrestrial TV signals.
Cable TV signals must fall within the specified frequency range.
⚙️ Technical Specifications
Brand: König
Product type: TV/SAT combiner
Number of inputs: 2
Number of outputs: 1 shared output
TV / VHF / UHF frequency range: 5–860 MHz
SAT frequency range: 950–2250 MHz
Connection type: F
DC pass-through / Power pass: Yes, on the satellite path
Specified control support: DiSEqC and tone control on the satellite path
Application: Combining TV and satellite signals on one coaxial cable
📦 Package Contents
- 1 × König TV/SAT combiner.
