ZXSignal is an outdoor 4G and 5G panel antenna with 4×4 MIMO, designed to improve the reception conditions for your mobile broadband connection. With four antenna connections in one enclosure, it provides a convenient solution for compatible routers and modems while keeping the installation compact and discreet.
When a mobile router is positioned indoors, walls, windows and the building’s location can affect reception. ZXSignal allows you to move the antenna outside and choose a position with better signal conditions. This makes it an appealing option for homes, holiday properties and small businesses, in both rural and built-up areas.
The antenna operates within 600–960 MHz and 1710–3800 MHz. These ranges cover several important mobile broadband bands, from lower frequencies used for coverage to higher frequencies used for capacity. 5G frequencies around 3.5 GHz are also included. Compatible 3G equipment can be used on frequencies within the stated operating ranges.
With 4×4 MIMO, the antenna is designed to use four antenna connections together. When supported by the router and mobile network, this can improve the conditions for efficient data transmission. All four connections are contained in one panel, simplifying positioning compared with an installation using several separate antenna housings.
Stated antenna gain is 5–23 dBi depending on the frequency band, with higher gain at higher frequencies according to the supplied information. Actual results also depend on cable loss, positioning and reception conditions. Choosing a suitable mounting location and adjusting the antenna’s alignment are therefore key parts of the installation.
ZXSignal includes four antenna cables measuring 10 metres each, terminated with SMA male connectors. This allows the panel to be installed outdoors while the router remains inside. Mast mounting brackets are included, and the antenna also supports wall installation. The white enclosure measures 410 × 185 × 60 mm, with a stated temperature range of −30 to +80 °C.
For a router with four compatible external antenna inputs, ZXSignal offers a complete panel antenna solution for 4G and 5G. Check the router’s connectors and the frequencies used at your location to make sure it suits your connection.
✅ Benefits
- 4×4 MIMO in one panel – four antenna connections within a single enclosure.
- Broad mobile frequency coverage – operates within 600–960 MHz and 1710–3800 MHz.
- Outdoor positioning – lets you find better reception conditions than at the router’s indoor location.
- Stated gain up to 23 dBi – varies by frequency band according to the supplied information.
- Four included 10-metre cables – provide routing flexibility between the antenna and router.
- SMA male router connectors – for compatible external antenna inputs with SMA female sockets.
- Mast brackets included – help with installation on a suitable antenna pole.
🎯 Ideal for
- 4G and 5G routers with four external antenna inputs and support for 4×4 MIMO.
- Homes and holiday properties with weak or inconsistent indoor reception.
- Home offices and small businesses using mobile broadband.
- Installations requiring 10 metres of cable per antenna connection.
- Anyone wanting four connections in a single outdoor panel antenna.
🔧 Connection and use
Check that your router or modem supports external 4×4 MIMO and has four compatible antenna inputs. The cables have SMA male connectors for suitable SMA female sockets.
Install the panel on a stable pole using the included mast brackets, or use a suitable wall mounting solution. Choose a location away from large obstructions and nearby metal objects.
Connect all four cables according to the router’s instructions. Each cable measures 10 metres. Avoid sharp bends and prevent the weight of the cables from pulling on the connectors.
Adjust the antenna alignment gradually while monitoring signal strength and signal quality. Allow readings to stabilise between changes and compare connection speeds as well.
Cable attenuation increases with frequency. Avoid unnecessary extensions and consider both reception conditions and cable routing when choosing the mounting position. Protect exposed connections with suitable weather sealing.
The stated operating ranges are 600–960 MHz and 1710–3800 MHz. Frequencies between 960 and 1710 MHz are not included in the specification.
📡 Capacity and connections
| Feature | Details |
|---|
| Antenna type | Outdoor panel antenna |
| MIMO | 4×4 |
| Antenna connections | 4 |
| Mobile technology | 4G/5G and compatible 3G within the operating ranges |
| Frequency ranges | 600–960 MHz and 1710–3800 MHz |
| Router-side connectors | 4 × SMA male |
| Number of cables | 4 |
| Cable length | 10 m per cable |
| Complete cable arrangement | 4 × 10 m |
⚙️ Technical specifications
| Feature | Specification |
|---|
| Product name | ZXSignal |
| Stated antenna gain | 5–23 dBi, depending on frequency band |
| Dimensions | 410 × 185 × 60 mm |
| Stated temperature range | −30 to +80 °C |
| Placement | Outdoor |
| Installation options | Wall or antenna pole |
| Included mounting hardware | Mast brackets |
| Enclosure colour | White |
| Cable colour | Black |
| Cable type | Not specified |
Cable attenuation over 10 metres, calculated from the supplied figures per 100 metres:
| Frequency | Attenuation per 10 m cable |
|---|
| 800 MHz | Approximately 2.90 dB |
| 1000 MHz | Approximately 3.27 dB |
| 1750 MHz | Approximately 4.58 dB |
| 2000 MHz | Approximately 5.05 dB |
| 2150 MHz | Approximately 5.16 dB |
| 2500 MHz | Approximately 5.70 dB |
| 2750 MHz | Approximately 5.94 dB |
| 3000 MHz | Approximately 6.40 dB |
Figures apply to each cable individually and exclude any additional connector or adapter losses.
📦 Package contents
- 1 × ZXSignal 4G/5G panel antenna with 4×4 MIMO.
- 4 × 10 m antenna cables with SMA male router connectors.
- Mast mounting brackets.
