Give your mobile broadband a better starting point with Super Hyperbolisk – a parabolic directional antenna with 2×2 MIMO for compatible 4G and 5G routers. It suits fixed installations where reception needs improvement and where an external antenna can be aligned towards a suitable base station.
Indoor router reception can be limited by walls, roofing and the equipment’s position within the building. An external antenna in a carefully selected location can give the router access to a better signal. Super Hyperbolisk uses a parabolic reflector to concentrate transmission and reception in a selected direction, making it an option for homes, holiday properties and workplaces where a fixed connection can be optimised.
The antenna provides two separate connections for 2×2 MIMO. With a compatible router, both connections can be used for multiple signal paths in the mobile network. Under suitable conditions, this can help improve signal quality, connection stability and data speeds.
The specified frequency ranges are 1710–2700 MHz and 3300–4200 MHz. This makes the antenna suitable for installations using mobile bands within these ranges, including 1800 MHz, 2100 MHz, 2600 MHz and 3.5 GHz. Matching the antenna to the frequencies used at the installation site is an essential part of achieving a good result.
Two LMR200 cables with SMA male connectors are included. Choose 2 × 5 metres or 2 × 10 metres according to the distance between the antenna and router. The five-metre option suits equipment positioned close to the antenna, while the ten-metre option offers greater cable routing flexibility.
The approximately 60 cm wide reflector has a dismantlable construction and includes a MIMO feed and mounting kit. The reflector is powder-coated, and unpainted metal parts are galvanised according to the supplied product information.
Super Hyperbolisk suits users who want to improve a fixed 4G/5G installation through careful antenna positioning and alignment. Actual performance depends on the available signal, network load, cable installation and router capabilities.
✅ Benefits
- Parabolic directional design. Allows reception to be focused towards a selected base station.
- 2×2 MIMO. Two separate antenna connections for compatible routers and modems.
- Selected 4G and 5G frequency coverage. Specified ranges are 1710–2700 and 3300–4200 MHz.
- Two LMR200 cables included. Supplied with SMA male connectors for matching equipment ports.
- Two cable options. Choose 5 or 10 metres per cable to suit the installation.
- Dismantlable reflector and mounting kit. The components assemble into a complete mast-mounted antenna solution.
🎯 Ideal for
- Homes and holiday properties with weak reception on frequencies within the specified ranges.
- Fixed mobile broadband installations where the antenna can face a selected base station.
- 4G/5G routers with two compatible SMA female antenna ports.
- Installations using frequencies such as 1800, 2100, 2600 or 3500 MHz.
- Locations with space for an approximately 60 cm wide reflector and stable mast mounting.
🔧 Connection and use
First check which frequency bands are used at the installation site. This antenna is specified for 1710–2700 MHz and 3300–4200 MHz. It is therefore unsuitable for installations that require antenna coverage at 700, 800 or 900 MHz.
Assemble the reflector, MIMO feed and bracket according to the product’s installation instructions. Choose a stable mounting point with the clearest practical path towards the base station.
Connect both SMA male connectors to the router’s compatible antenna ports. Enable external antennas in the router settings if required by the equipment.
Adjust the direction in small steps. Allow the router to update its signal readings and compare signal quality, speed and stability before securing the final position.
Choose the shortest cable option that reaches your equipment. Protect outdoor connections against moisture, provide cable strain relief and avoid sharp bends.
📡 Capacity and connections
| Feature | Details |
|---|
| Antenna type | Parabolic directional antenna |
| Antenna system | 2×2 MIMO |
| Specified frequency ranges | 1710–2700 MHz / 3300–4200 MHz |
| Application | Compatible 4G LTE and 5G equipment within the specified ranges |
| Radiation pattern | Directional |
| Polarisation | Linear, MIMO |
| Connectors | 2 × SMA male |
| Cable type | LMR200 |
| Cable options | 2 × 5 m or 2 × 10 m |
⚙️ Technical specifications
| Feature | Specification |
|---|
| Product name | Super Hyperbolisk |
| Reflector | Parabolic, dismantlable |
| Stated VSWR | ≤ 1.5 within the operating frequency ranges |
| Input impedance | 50 Ω |
| Stated port isolation | At least 20 dB |
| Stated maximum input power | 120 W |
| Dimensions as supplied | 600 × 600 × 140 mm |
| Reflector finish | Powder-coated |
| Unpainted metal parts | Galvanised according to supplied information |
| Operating temperature | −40 to +50 °C |
| Mounting | Mast mounting with included mounting kit |
📦 Package contents
- 1 × Super Hyperbolisk parabolic reflector.
- 1 × MIMO antenna feed.
- 2 × LMR200 antenna cables with SMA male connectors.
- Selected cable length: 5 or 10 metres per cable.
- Mounting kit.
