Give your mobile broadband connection better reception conditions with an omnidirectional outdoor 5G/4G LTE MIMO antenna. It combines two antenna elements in one compact enclosure and suits compatible routers and modems with two external antenna inputs. A practical solution for homes, holiday properties and small businesses with weak or inconsistent indoor reception.
The omnidirectional design receives signals from different directions around the antenna. This makes it particularly useful in built-up areas or locations with several nearby base stations. It does not require precise alignment towards one base station in the same way as a directional antenna, simplifying installation.
The antenna operates within 698–960 MHz and 1710–2700 MHz, supporting 5G and 4G LTE on frequencies within these ranges. Compatible 3G and GSM signals are also supported within the operating ranges. This provides flexibility for different mobile network installations, provided the equipment’s active bands match the antenna.
With two cross-polarised elements for 2×2 MIMO, both antenna inputs on a compatible router can be used together. When supported by the equipment and mobile network, MIMO can contribute to more efficient data transmission and improved capacity. Both elements share one enclosure, keeping the installation compact.
Stated gain is 10–16 dBi depending on frequency. Combined with suitable positioning, the antenna can help improve reception conditions for working from home, streaming and everyday internet use. Results also depend on network load, cable attenuation and local reception conditions.
The white enclosure is IP67-rated and designed for outdoor installation. Its construction combines plastic and metal, while the included pole and wall bracket provides several mounting options. According to the supplied specifications, it fits poles up to 52 mm in diameter.
The antenna includes two RG174 cables measuring 5 metres each, terminated with SMA male connectors. This allows the antenna to be positioned outdoors while the router remains inside. A convenient choice for an omnidirectional 5G/4G MIMO setup with cables and mounting hardware included.
✅ Benefits
- Supports 5G and 4G LTE – with compatible equipment within the stated operating ranges.
- Omnidirectional reception – receives signals from different directions around the antenna.
- 2×2 MIMO in one enclosure – two cross-polarised elements for equipment with dual antenna inputs.
- Stated gain up to 16 dBi – varies by frequency according to the supplied information.
- IP67-rated enclosure – protection against dust and water for outdoor use.
- Two included 5-metre cables – with SMA male connectors.
- Pole and wall bracket included – offers flexible positioning.
🎯 Ideal for
- 5G and 4G routers with two compatible external antenna inputs.
- Homes and holiday properties with weak indoor reception.
- Built-up areas or locations with multiple surrounding base stations.
- Home offices and small businesses using mobile broadband.
- Installations needing two MIMO elements in one compact outdoor antenna.
🔧 Connection and use
Check that your router or modem supports external mobile network antennas and operates within 698–960 MHz or 1710–2700 MHz. Two suitable antenna inputs are required to use both elements.
Install the antenna upright and vertically on a wall or pole using the supplied bracket. Choose an open position away from large obstructions and nearby metal objects.
Connect both 5-metre cables according to the router’s instructions. The cables have standard SMA male connectors for compatible SMA female inputs. Avoid sharp bends and strain on the connectors.
Monitor signal strength and signal quality, and compare different mounting locations where practical. Allow readings to stabilise between changes.
Avoid unnecessary cable extensions. RG174 attenuation varies with frequency and should be considered when planning the cable run. Protect exposed connections and cable entries against moisture.
The antenna supports 5G within its stated operating ranges. The 5G band around 3.5 GHz is outside these ranges.
📡 Capacity and connections
| Feature | Details |
|---|
| Antenna type | Omnidirectional outdoor antenna |
| MIMO | 2×2 |
| Antenna elements | Two cross-polarised elements |
| Mobile technology | 5G, 4G LTE and compatible 3G/GSM within the operating ranges |
| Frequency ranges | 698–960 MHz and 1710–2700 MHz |
| Router-side connectors | 2 × SMA male |
| Cable type | RG174 |
| Cable length | 2 × 5 m |
| Impedance | 50 Ω |
⚙️ Technical specifications
| Feature | Specification |
|---|
| Stated gain | 10–16 dBi, frequency-dependent |
| VSWR | < 2.5 |
| Radiation pattern | Omnidirectional |
| Maximum power | 10 W |
| Enclosure rating | IP67 |
| Materials | Plastic and metal |
| Colour | White |
| Dimensions | 230 × 65 × 65 mm |
| Mounting | Pole or wall |
| Pole diameter | Up to 52 mm |
| Mounting orientation | Vertical |
📦 Package contents
- 1 × omnidirectional 5G/4G LTE MIMO antenna.
- 2 × 5 m RG174 antenna cables with SMA male connectors.
