Give your wireless connection better reception conditions with an omnidirectional antenna for 5G, 4G LTE and 2.4 GHz WiFi. Designed for compatible equipment with an external antenna input, it lets you position the antenna where signals have a better chance of reaching it. A practical solution for homes, holiday properties and small businesses with weak or inconsistent indoor reception.
The omnidirectional design receives and transmits signals from different directions around the antenna in the horizontal plane. It does not require precise alignment towards one base station in the same way as a directional antenna. This simplifies installation where several base stations are nearby or exact alignment is impractical.
The antenna operates within 806–960 MHz and 1700–2700 MHz, supporting 5G and 4G LTE on frequencies within these ranges. Compatible 3G and GSM signals are also supported. For a mobile router, this means the antenna can serve several mobile technologies, provided the operating frequencies and connections match.
2.4 GHz WiFi also falls within the specified operating range. When connected to compatible WiFi equipment, the antenna can be used for a wireless network link. Its application depends on the connected device; the antenna does not independently combine mobile broadband and WiFi.
At 740 mm high and 72 mm in diameter, the antenna has a long, slim design. An aluminium pole and wall mounting bracket is included, providing several positioning options. According to the supplied specifications, the bracket fits poles up to 42 mm in diameter, and the temperature range is −40 to +65 °C.
The antenna has an N female connector and comes with three options: no additional cable, a 5-metre cable or a 10-metre cable. Optional cables have an SMA male connector at the equipment end. Choose a length that suits your installation and avoid unnecessarily long cable runs to limit signal loss.
A flexible choice for mobile broadband or 2.4 GHz WiFi installations, with a mounting bracket and optional cable lengths. Suitable positioning, matching connectors and support for the frequencies used locally provide the foundation for a successful setup.
✅ Benefits
- Supports 5G and 4G LTE – with compatible equipment operating within the stated frequency ranges.
- 2.4 GHz WiFi support – suitable for compatible WiFi devices with external antenna connections.
- Omnidirectional reception – receives signals from several directions without precise base station alignment.
- Flexible positioning – install indoors or outdoors where reception conditions are better.
- Three cable options – no additional cable, 5 m or 10 m.
- N female antenna connector – connects a compatible antenna cable.
- Pole and wall bracket included – fits poles up to 42 mm in diameter.
🎯 Ideal for
- 5G and 4G routers with compatible antenna inputs and operating frequencies.
- Homes and holiday properties where an external antenna can be positioned more effectively.
- Home offices and small businesses using mobile broadband.
- 2.4 GHz WiFi installations with suitable equipment and connectors.
- Locations needing omnidirectional reception and flexible pole or wall mounting.
🔧 Connection and use
Check that your equipment operates within 806–960 MHz or 1700–2700 MHz. The antenna supports 5G within these ranges, but the 5G band around 3.5 GHz is not covered.
Install the antenna upright and vertically on a pole or wall using the supplied bracket. Choose an open position away from large metal objects and obstructions.
Connect a compatible cable to the antenna’s N female socket. Optional cable packages include a 5- or 10-metre cable with an SMA male equipment connector.
Check the connector on your router or WiFi device. Standard SMA and RP-SMA are different connector types, so a suitable cable or adapter is required.
Compare signal strength, signal quality and connection speed at different positions. Keep the cable run as short as practical, avoid sharp bends and seal exposed connections appropriately.
This antenna has one connection. Equipment requiring multiple external antennas for MIMO needs additional compatible antennas.
📡 Capacity and connections
| Feature | Details |
|---|
| Antenna type | Omnidirectional |
| Frequency ranges | 806–960 MHz and 1700–2700 MHz |
| Mobile technology | 5G, 4G LTE and compatible 3G/GSM within the operating ranges |
| WiFi | 2.4 GHz with compatible equipment |
| Antenna connections | 1 |
| Antenna connector | N female |
| Optional cable equipment connector | SMA male |
| Cable options | No additional cable, 5 m or 10 m |
| Impedance | 50 Ω |
⚙️ Technical specifications
| Feature | Specification |
|---|
| Product type | Omnidirectional multiband antenna |
| Placement | Indoor or outdoor |
| Maximum power | 10 W |
| Height | 740 mm |
| Diameter | 72 mm |
| Weight | 2.1 kg |
| Stated wind resistance | Up to 210 km/h |
| Temperature range | −40 to +65 °C |
| Mounting | Pole or wall |
| Bracket material | Aluminium |
| Pole diameter | Up to 42 mm |
📦 Package contents
- 1 × omnidirectional 5G/4G LTE and 2.4 GHz WiFi antenna.
- 1 × aluminium pole/wall mounting bracket.
