Distribute a compatible mobile signal booster’s output to two indoor antennas with a 2-way N splitter. This passive divider provides two antenna branches, making it easier to plan signal distribution across two rooms, different areas of a building or separate floors.
The 800–5000 MHz frequency range supports compatible 4G, 5G and other RF systems within that range. This includes frequencies around 800, 900, 1800, 2100, 2600 and 3500 MHz. Check that all operating bands used by the installation fall within the specified range.
The splitter has one input and two outputs, all N female. It connects using 50 Ω antenna cables with N male connectors, providing a practical solution for fixed antenna installations. No separate power supply is required.
Its cavity construction features a black aluminium housing and silver-plated phosphor bronze inner conductors. The stated maximum power rating is 200 W, and dimensions are 210 × 60 × 25 mm.
The splitter distributes available signal power; it does not amplify it. Allow for both splitting loss and cable attenuation to each antenna. Careful planning helps adapt the antenna system to the building.
✅ Benefits
- Two antenna outputs – connect two antenna branches to one common feed.
- 800–5000 MHz – covers several mobile bands, including 5G around 3.5 GHz.
- N female connectors on all ports – connect matching N male cables.
- 50 Ω impedance – for compatible signal booster and RF systems.
- Stated 200 W power rating – subject to the product’s operating conditions.
- Passive design – no separate power supply required.
- Aluminium housing with silver-plated inner conductors – for fixed antenna installations.
🎯 Ideal for
- Mobile signal boosters serving two indoor antennas.
- Signal distribution across two rooms or floors.
- Compatible 4G and 5G systems within 800–5000 MHz.
- 50 Ω antenna installations with N connectors.
🔧 Connection and use
Connect the compatible booster’s cable to the splitter’s common input. Connect the antenna cables to the two outputs. Follow the product’s port markings and use 50 Ω coaxial cables with N male connectors.
Plan each branch according to cable length, attenuation and antenna position. Support the cables to prevent strain on the connectors.
Check that the installation’s operating frequencies and power meet the product specifications. Handle unused ports according to the manufacturer’s instructions.
The splitter does not create MIMO. Separate MIMO signal paths must remain separate according to the equipment’s installation instructions.
📡 Capacity and connections
| Feature | Details |
|---|
| Function | Passive 2-way RF power distribution |
| Frequency range | 800–5000 MHz |
| Input | 1 × N female |
| Outputs | 2 × N female |
| Matching cable connectors | N male |
| Impedance | 50 Ω |
| Stated maximum power | 200 W |
| VSWR | ≤ 1.2 |
| Working-band ripple | ≤ 0.2 dB |
| Power supply | No separate power supply required |
📉 Splitting loss
An ideal equal two-way split introduces approximately 3.01 dB loss per output, before additional component and cable losses.
The supplied insertion-loss figure of ≤ 0.1 dB requires confirmation as excess loss above theoretical splitting loss. It should not be presented as total loss per output.
⚙️ Technical specifications
| Feature | Specification |
|---|
| Product type | Antenna splitter / RF power divider |
| Construction | Cavity divider |
| Outputs | 2 |
| Total RF ports | 3 |
| Third-order intermodulation | ≤ −120 dBc at 2 × 43 dBm |
| Inner conductor material | Phosphor bronze |
| Inner conductor plating | Silver |
| Housing material | Aluminium |
| Surface finish | Black paint |
| Dimensions | 210 × 60 × 25 mm |
| Quantity | 1 piece |
📦 Package contents
- 1 × 2-way antenna splitter, 800–5000 MHz, with one N female input and two N female outputs.
